2012 STATE OF THE ART POWDER COAT CONVEYORIZED FINISHING SYSTEM w/ 84”x 40” Work Opening, including; (2) ITW GEMA OptiFlex A2 Powder Coat Paint Booths, GAT 6 Stage Wash, GAT Dry-Off Oven, GAT Cure/Bake Oven & 850’ Enclosed Track Overhead Conveyor, Cost OVER $1,000,000

In Detail:

2011 ITW GEMA OptiFlex A2 Powder Coat Paint System, s/n 18101-00951, w/ 2 x (8) OptiStar Guns & Control, (1) OptiStar Touch Up Gun & Control, Stainless Steel Booth w/ 84”x 40” Work Opening, FIRE SENTRY SYSTEMs Fire Suppression System, 2014 DONALDSON TORIT DF03-12 Reclaim/Filter Unit, s/n 3178997-5

2010 ITW GEMA OptiFlex A2 Powder Coat Paint System, s/n 18101-00763, w/ 2 x (8) OptiStar Guns & Control, (1) OptiStar Touch Up Gun & Control, Stainless Steel Booth w/ 84”x 40” Work Opening, FIRE SENTRY SYSTEMs Fire Suppression System, 2014 DONALDSON TORIT DF03-12 Reclaim/Filter Unit, s/n 3178997-6

2012 GAT (General Automatic Transfer Co.) 6 Stage Wash System, w/ Stage 1 – Clean @ 1200 GPM, Stage 2 – Rinse @ 200 GPM, Stage 3 – Fe/PHs @ 975 GPM, Stage 4 – Rinse @ 200 GPM, Stage 5 – Rinse @ 200 GPM, Stage 6 – Seal @ 200 GPM;
Polypropylene Extended Life Housing, Stainless Steel Drainboards, Stainless Steel Tanks, Stainless Steel Pumps, 84”x 40’ Work Opening, RITE ENG 1050W Natural Gas Fired Boiler, s/n 31231 w/ 10,500,000 BTU, ECLIPSE BOILER MAG XT Magnet, ECLIPSE High Intensity Magnetic Separator, SmartSkim Oil Skimmer/Separator

2012 GAT (General Automatic Transfer Co.) Elevated Bottom Entry Dry-Off Oven & Floor Mount Cure/Bake Oven, Six Pass Combination Dry-Off and Cure/Bake Oven Providing Maximum 350 deg and 450 deg Respectively. NOTE: The dry-off oven is a completely separate oven, mounted on top of the cure/bake oven yet having a bottom and entry and exit.

850’ Enclosed Track Overhead Conveyor System, w/ Variable Speed Drive

CONTROLLED PYROLYSIS PRC390 3896 Gas Fired Burn-Off Oven, w/ 875,000 BTU

(2) NILFISK CFM Fine Particle Vacuums

SECONDARY PAINT SYSTEMS:

2006 ITW GEMA Powder Coat Conveyorized Finishing System, s/n 14001-01440, w/ (2) OptiTronic Control w/ 8 Guns, Stainless Steel Booth w/ 90”x 30” Work Opening, (2) Reclaim & Filter Units (Ogden)

SYSTEM MFG Co 3 Stage Wash (Ogden)

DRI-QUICK 120-60-37CG Natural Gas Fired Infrared Oven, s/n 9092-1196, w/ 150 kw, 4,500,000 BTU, 84”x 42” Work Opening (Ogden)

DRI-QUICK 50-60-37CG Natural Gas Fired Infrared Oven, s/n 9091-1196, w/ 62.5 kw, 1,875,000 BTU, 84”x 42” Work Opening (Ogden)

CONTROLLED PYROLYSIS PRC340 6061 Gas Fired Burn-Off Oven, w/ 875,000 BTU (Ogden)

RUWAC WNS-2220 Fine Particle Vacuum

(5) STRAIGHT SIDE PRESSES & FEED LINES

2008 SEYI SM2-220 220 Ton Straight Side Press, s/n SM2-220-027, w/ 59”x39.37”x7” T-Slotted Bolster, 59”x35.43” Slide Area, 7.87” Stk, 4.94” Adj, 18.72” SH, 50-120 SPM, 27” Windows, WINTRISS Smart PAC 2 Press Monitor, QDC System w/ Hyd. Die Clamping, DSI-2 Dipro Sensor Interface, SHADOW 8 Safety Lights Curtains (Ogden)

COE 18”x10,000 lb. Feed Line, w/ CPRF-518 18” Servo Feeder, s/n 46597-1, CPPS-350-18 18” Straightener, .020”-.310” Thickness, s/n 46597-3, CPR-PO-10018 18” Uncoiler & Coil Car, s/n 46597-4 (Ogden)

2003 SUTHERLAND EHW220 220 Ton Eccentric Crankless Straight Side Press, s/n 10205202018, w/ 72”x 48”x7” T-Slotted Bolster, 72”x42” Slide, 6” Stk, 6” Adj, 24” SH, 60-120 SPM, 40 HP, 32” Windows, ALLEN BRADLEY Control w/ WINTRISS Smart PAC 2 Press Monitor, QDC System w/ Hyd. Die Clamping, Die Lifter, Light Safety Curtains (Ogden)

COE 24”x10,000 lb Feed Line, w/ Servo Master 3 CPRE 524 24” Servo Feeder, s/n 43331.1, CPPS 350-24 24” Straighter, w/.020”-.310” Thickness, s/n 43331-3, CPR P010024 24”x10,000 Lb. Uncoiler w/Coil Car, s/n 43331-4, UNIST SPR-2000 Prog. Fluid Controller w/ Roller Lubricator (Ogden)

1994 HEIM S2-300MS 100×48 300 Ton Straight Side Press, s/n H-3839, w/ 100”x48”x6” T-Slotted Bolster, 8” Stk, 12” Adj, 30” SH, 30-60 SPM, 32” Windows, WINTRISS Smart PAC 2 Press Monitor, WPC 2000 Clutch/Bake Monitor, Hydraulic Die Clamping Ram and Bolster (Ogden)

SUTHERLAND 24”x10,000 lb Feed Line, s/n NA, w/ 24” Servo Feed, 24” Straightener, 24”x10000 Lb. Uncoiler & Coil Car, UNIST SPR-2000 Prog. Fluid Controller w/ Roller Lubricator, SPF-357 Prog. Alpha-Numeric Feed Control (Ogden)

ROUSSELLE 6SS56 60 Ton Straight Side Press, s/n 3059414X52, w/ 22”x56” Bolster, 3” Stk, 110 SPM, 3” Adj, 19” SH, WINTRISS Press Control, #27

ROUSSELLE 60 Ton Straight Side Press, w/ 18”x72” Bed, 4” Stk, 11.5” SH, #14

(24) GAP FRAME PRESSES & FEED EQUIPMENT

(8) SEYI SN1-121 121 Ton OBG Presses, s/n EW121-4259 2010, EW121-4257 2010, EW1214258 2011, EW1214509 2012, EW1214095 2009, EW1214247 2010, EW1214246 2009, EW1214248 2009, w/45.3”x26.8” Bolster, 25.6”x 20.5” Slide, 7.1” Stk, 3.5” Adj, 35-75 SPM, 13.8” SH, Motorized Slide Adjustment, Automatic Lubrication Sys., WPC2000-S Press Control

2007 SUTHERLAND MARK 121-1 121 Ton Gap Frame Press, s/n 200707006, w/ 45.27”x 26.7”x4.75” T-Slotted Bolster, 24.6”x 20.5”Slide, 4.3” Stk, 3.2” Adj, 15.2” SH, 50-100 SPM, 15 HP, WINTRISS Smart PAC 2 Press Monitor, Pedestal Mounted Controls, SICK Light Curtains (Ogden)

(4) 2006 SUTHERLAND MARK 121-1 121 Ton OBG Presses, s/n N1100626, N1100627, N1100628, N1100629, w/ 45.3”x26.7” Bolster, 24.6”x20.4” Slide, 7” Stk, 35-70 SPM, 3.1” Adj, 13.7” SH, 15 HP, WINTRISS WPC2000 Prog Press Control, #15,#5,#41,#3

(2) 2002 SUTHERLAND MARK 121-1 121Ton OBG Presses, s/n 10201101007, 10111101002, w/ 45.3”x 26.8” Bolster, 25.6”x19.7” Slide, 4.3” Stk, , 3.1” Adj, 12.6”SH, 45-90 SPM, 15 HP, SPC-357 Prog Press Control, #18, #19

2002 SUTHERLAND MARK 121-1 121 Ton Gap Frame Press, s/n 10111101001, w/ 45.27”x26.7” T-Slotted Bolster, 24.6”x20.5” Slide, 4.3” Stk, 3.2” Adj, 15.2” SH, 45-90 SPM, 15 HP, Prog Press Control w/Die Protection, Pedestal Control, Light Curtains (Ogden)

2000 SUTHERLAND FCP-110 110 Ton Gap Frame Press, s/n F-15415110268, w/45.27”x27.5” T-Slotted Bolster, 25.5”x20.5” Slide, 4.3” Stk, 3.5” Adj, 12.6” SH, 45-90 SPM, 15 HP, WINTRISS ProCam 1500 Prog Press Control w/ Die Protection, Pedestal Control, Light Curtains (Ogden)

(2) 2003 & 2002 SUTHERLAND MARK 88-1 88 Ton OBG Presses, s/n 200305023, 10201101005, w/ 39.4”x 21.6” Bolster, 22”x16.5” Slide, 4” Stk, 2.7” Adj, 11.8” SH, 50-100 SPM, 10 HP, SPC-357 Prog. Press Control, #12, #20

2004 SUTHERLAND MARK 88-1 88 Ton OBG Press, s/n 200405026, w/ 39.4”x21.6” Bolster, 22”x16.5” Slide, 5.9” Stk, 40-75 SPM, 2.7” Adj, 12.9” SH, 10 HP, SPC-357 Progr. Press Control, #11

2006 SUTHERLAND MARK 66-1 66 Ton OBG Press, s/n N600620, w/ 35.4”x20.4” Bolster, 19.6”x15.7” Slide, 3.5” Stk, 2.7” Adj, 10.6” SH, 60-120 SPM, 10 HP, WINTRISS WPC 2000 Press Control, #6

(3) 2002 SUTHERLAND MARK 66-1 66 Ton OBG Presses, s/ 10201101001, 10201101002, 10201101003, w/ 38.2”x19.6” Bolster, 18.5”x 15”Slide, 3.2” Stk, 2.4” Adj., 10.6” SH, 10 HP, 55-110 SPM, SPC-357 Prog. Press Control, #21, #22, #23

DALLAS D325-12-24 RH Feed, s/n 19597 (Ogden)

COE SERVOMASTER 12” Servo Feed (Ogden)

DALLAS DPR-6000 x 18RH Uncoiler, s/n 19595, w/ 16”-21” ID x 60” OD, Vari-Speed (Ogden)

DALLAS DPR-6000 x 24RH Uncoiler, s/n 06145-E, w/ 16”-21” I.D./60” O.D., Vari-Speed (Ogden)

(19) OBI PRESSES

ROUSSELLE B1-70 70 Ton OBI, w/ 4” Stk, 55 SPM, 12.5” SH (Smithfield)

BROWN BOGGS 17LS 60 Ton A/C OBI Press, s/n 10479, w/ WINTRISS Clutch/Brake Control

MINSTER No6 60 Ton OBI Press, w/ 23” x 21” Bed, 4” Stk, Brake Monitor, Pedestal Palm Button Controls (Smithfield)

BLISS C60 60 Ton OBI Press, s/n 67341, w/ 3” Stk, 4” Adj, 14” SH, #36

DANLY 60 Ton OBI, s/n 6057380172, w/ 32”x21” Bolster, 3.5” Stk, 13.5” SH, 3” Adj, 100 SPM (Ogden)

SOUTHBEND OBI-60 60 Ton OBI Press, s/n 79018, w/ 4” Stk, 12.25” SH, WINTRISS WPC Clutch/Brake Control, #33

ROUSSELLE 55 Ton OBI Press, s/n P-31763, w/ 3” Stk, 4” Adj, 21” SH, 120 SPM, #31

MINSTER 45 Ton OBI Press, w/ 47”x20” Bolster, 3” Stk, 9.5” SH, #28

MINSTER 45 Ton OBI Press, s/n 9314, w/ 22”x18” Bolster, 3” Stk, 9.5” SH, WINTRISS Press Control, #3

DANLY 45 Ton OBI Press, s/n 4559090374, w/30”x34” Bed, 3” Stk, 120 SPM, #34

BLISS C45 45 Ton OBI Press, s/n H67729, w/ 3” Stk, 3” Adj, 13.25” SH, #39

ROUSSELLE No 4B 40 Ton Press, w/17”x36” Bed, #35

MINSTER 40 ton OBI, s/n : 5-15603, w/ 2” Stk, 95 SPM, 2.75” Adj, 11.25” SH, #4

ROUSSELLE 40 Ton OBI, w/ 20” x 40” Bed, 3” Stk, 11” SH, #1

BLISS C35 35 Ton OBI Press, s/n 65782, w/ 2.5” Stk, 3” Adj, 10.75” SH, WINTRISS Press Control, #29

BLISS C35 35 Ton OBI Press, s/n H666433, w/2.25” Stk, 3” Adj, 10.75”SH, # 2

MINSTER No5 35 Ton OBI Press, s/n 5-9314, w/ 3” Stk, 2.25” Adj, WINTRISS Press Control, #3

DANLY 35 Ton A/C OBI, s/n 3557880172, w/ 26”x15” Bolster, 3” Stk, 10” SH, 2.25”Adj, 90-180 SPM (Ogden)

NIAGARA A6-1/2 Geared Inclinable Horn Press, s/n 29455, w/ 52.5”x 3”x 2.75” T-Slotted Bolster, 4.78” Stk., WINTRISS WPC Clutch/Brake Control (Ogden)

(7) CNC TUBE BENDERS

(2) 2006 EATON LEONARD VB 80 HP CNC Electric Bend Arm Drive Tube Benders, s/n VB80HPLH3POS860420LSB 09/06, VB80HPLH3POS860421LSB 09/06, w/ Light-Speed PC Based Graphic 3-Axis CNC Control, 3.15”ODx .140” Wall Max Tube, 12” Max. Centerline Radius, 12’ Max Tube Length Over Mandrel, 195 deg Max Bend Angle, 32 RPM Max Bend Arm Speed, Three Position Head Shifter, Left-Hand Counter Clockwise Rotation Bend Arm, #1,#2

1996 EAGLE EPT-75 CNC 3 Axis Tube Bender, s/n 96-966, w/ EPT-XY-COM Color 3 Axis CNC Control, 3” OD x.125” MS, 3” OD x.062” SS, 10” Max Centerline Radius, 118” Max. Tube Length Over Mandrel, 114” Carriage Travel, 24 RPM Bend Arm Speed, Max. Bend Angle 187 deg, 40 HP, Left Hand Counter Clockwise Rotation (Ogden)

1995 EAGLE EPT-75 CNC 3 Axis Tube Bender, s/n 95-966, w/ 3”OD x.125” MS, 3”OD x .062” SS, 10” Max Centerline Radius, 118” Max Tube Length over Mandrel, 114” Carriage Travel, 24 RPM Bend Arm Speed, Max Bend Angle 187 deg, 40 HP, Left Hand Counter Clockwise Rotation, NOTE: This Machine Rebuilt & Retrofitted in 2007 by EATON LEONARD w/ Light-Speed PC Based CNC 3 Axis Control, New Eagle s/n VB75RBLH860467LSB 05/07

1995 EAGLE EPT-75 CNC 3 Axis Tube Bender, s/n 95-921, w/EPT-XY-Com 3 Axis CNC Control, 3”OD x .125” MS, 3”OD x .062” SS, 10” Max Centerline Radius, 118” Max Tube Length Over Mandrel, 114” Carriage Travel, 24 RPM Bend Arm Speed, Max Bend Angle 187 deg, 40 HP, Left Hand Counter Clockwise Rotation

1994 EAGLE EPT-60 CNC 3 Axis Tube Bender, s/n 94-856, w/EPT-XY-COM Full Color 3 Axis CNC Control, 2.25”OD x .140” MS, 3”OD x .062” SS, 10” Max Centerline Radius, 118” Max Tube Length over Mandrel, 114” Carriage Travel, 24 RPM Bend Arm Speed, Max Bend Angle 187 deg, 40 HP, Left Hand Counter Clockwise Rotation

1994 EAGLE EPT-60 3-Axis CNC Tube Bender, s/n 94-844, w/EPT 3-Axis CNC Control, 2.25”OD x .140” MS, 3”OD x .062” SS, 10” Max Centerline Radius, 118” Max. Tube Length over Mandrel, 114” Carriage Travel, 24 RPM Bend Arm Speed, Max Bend Angle 187 deg, 40 HP, Left Hand Counter Clockwise Rotation

(6) VERTICAL BANDSAWS

2009 HYD-MECH V25APC CNC Vertical Bandsaw, s/n VA1009023, w/ 30”Hx 25”W Cap, 25” Round Cap @ 90 deg, 1.50”x21” Blade, 10 HP VFD Blade Drive, 75-350 SFPM Blade Speeds, 1000 Job PLC Control, 120” Multi-Indexing Bar Feed, (2) Full Stroke Hyd Clamps, Prog Mitering 60 deg Left & 60 deg Right, Hyd Overhead Bundling, 20’ Roller Table

(3) HYD-MECH V18APC CNC Vertical Bandsaws, s/n K0911380, K0801262, K1299199, w/20”x18” Cap, 17.5” Round Cap @ 90 deg, 1.25”x16’11” Blade, 7.5 HP VFD Blade Drive, 65-385 SFPM Blade Speeds, 99 Job PLC Control, Prog Mitering, Hyd Overhead Bundling, 20’ Roller Table, NEW AS 2011

MARVEL 2125A-PC60 CNC Vertical Bandsaw, s/n E212520166PC, w/ 21”x25” Cap, 20” Round Cap, 20”x11.25” @ 60 deg, 1.25”x 17’6” Blade, 7.5 HP Drive Motor, 30-500 FPM Blade Speeds, 48” Stk Automatic Bar Feed, PC-II PLC Control, 20’ Entry Roller Table

HEM VT130HA-60SS Auto Vertical Bandsaw, s/n NA, w/ 20”x24” Vert., 20”x16” Vert @ 45 deg, 10 HP, 0 – 48” Multiple Index Bar feed, Overhead Clamps, Prog. Bar Feed & Tilt Head, Variable Vise Pressure (Ogden)

(13) ROBOTIC WELDING CELLS

2010 GENESIS SYSTEMS Welding Cell, Job #J6925w/ FANUC R-30iA Control & Teach Pendant, FANUC 100ic 6-Axis Robot, 54”reach x 37”stk, TregasKiss Tough Gun Air Cooled Mig Gun, LINCOLN Power Wave i400 Welder, VERSA RCT High Speed Center Mount 2 Station 8’ Dia. Turntable, Weld Enclosure & Fume Hood, #4

(3) 2009 GENESIS SYSTEMS Welding Cells, Job #’s J6432, J6193, J6433, w/ FANUC R-30iA Control & Teach Pendant, FANUC 100ic 6-Axis Robot, 54”reach x 37”stk, TregasKiss Tough Gun Air Cooled Mig Gun, LINCOLN Power Wave i400 Welder, VERSA RCT High Speed Center Mount 2 Station 8’ Dia Turntable, Weld Enclosure & Fume Hood, #1, #2, #3

(3) 2007 GENESIS SYSTEMS Welding Cells, Job #’s J4484, J4483, J4482, w/ FANUC RJ3iC Control & Teach Pendant, FANUC 100iBE 6-Axis Robot, 54”reach x 37”stk, TregasKiss Tough Gun Air Cooled Mig Gun, LINCOLN Power Wave 455M Welder, VERSA RCT High Speed Center Mount 2 Station 8’ Dia Turntable, Weld Enclosure & Fume Hood, #15, #16, #12

(3) 2001 GENESIS SYSTEMS Welding Cells, Job #’s 1552, 1567, 1568, w/ FANUC RJ3 Control & Teach Pendant, FANUC 100i 6-Axis Robot, 54”reach x37”stk, TregasKiss Tough Gun Air Cooled Mig Gun, LINCOLN CV400 Welder, VERSA RCT High Speed Center Mount 2-Station 8’ Dia Turntable, Weld Enclosure & Fume Hood, #5, #8, #11
2001 GENISIS SYSTEMS Dual Welding Cell, w/ , FANUC 100 6-Axis Robot, 54”reach x37”stk, FANUC RJ2 Control & Teach Pendant,

(2) LINCOLN CV-400 Welders, VERSA RCT High Speed Center Mount 2-Station 8’ Dia Turntable, Weld Enclosure & Fume Hood,(Not Functional – Board Missing) #10

(2) MILLER OTC 6-Axis Welding Robots, w/ MILLER DELTAWELD 451 Welder, MILLER COMPUTER INTERFACE, Fiber Optic Weld Controller

2002 UAS DUST HOG FJH160-4-H55 Fume Extractor/Filter, s/n 60053816, w/ 96,000 CFM, 250 hp

UAS DUST HOG FJH96-4-H55 Fume Extractor/Filter, s/n 60031703, w/ 72,000 CFM

ANGLE BENDING ROLLS

(2) 2009 & 2008 CARELL IMCAR CPHV100 Angle Bending Rolls, s/n B3070490, B3070484, w/4”x4”x½” Leg Out, 3.5”x 3.5”x 3/8” Leg In, 3.5” Pipe Cap, 12.5” Dia Bending Rolls, 7”x1-3/8” Flat Bar Cap

CNC TURRET PUNCH PRESS

1990 AMADA PEGA 345 QUEEN Turret Punch, s/n NA, w/ FANUC 04PC CNC Control, 33 Ton, 40” x 50” Travel, ¼” Max. Sheet Thickness, 58 Station Thick Turret w/ (2) Auto Index Stations, Hyd Clutch (Ogden)

PLUS, Over 500 pieces of Amada Tool Holders and Tooling (Ogden)

TRUMPF Quick Sharpe Punch and Die Sharpener, w / Enclosed Auto Wet Grinding Cycle (Ogden)

PRESS BRAKES

(2) GUIFIL PE20-60 66 Ton x 6’8” Up-Acting Hyd CNC Press Brakes, AUTOMECH 2 Axis CNC Control, 4’5” Between Housings, 4” Stroke, 12” Open Height, 16” Throat Depth (Ogden)

DREIS & KRUMP 810L 90 Ton x 10’ Mechanical Press Brake, s/n L19258, 60 Ton Punching Cap, 18” x 120” Ram, 24” x 120” Bed, Pedestal Palm Button Control, Power Ram Adjustment

MISCELLANEOUS MACHINE TOOLS

2008 SWI TRAK DPMSX3 5hp CNC Mill, s/n 082CE16370, w/ PROTO TRAK SMX Control; 2007 SHARP TMV-1 5hp Mill, s/n 50301340 w/ ACCURITE Prog DRO (Ogden); 2001 KING RICK SV54B CNC Mill, s/n 11821; (3) TASK MASTER No3 CNC Mills; (2) ACRA AM3VVAC CNC 3hp Mill, s/n 1009449,NA, w/ CENTOID M400 Control; TREE VMC750 CNC Machining Center, s/n 985331314; MILLPORT VMC1660 CNC Mill, s/n 290048, w/ CENTOID M400 Control; BRIDGEPORT 2hp Mill, w/ 2 Axis Pwr Table & Drawbar; TRUMP AM2V 3hp Mill, s/n 971274, w/ Pwr Feed Table & Drawbar; SUPERMAX YC-1-VS-T 3hp Mill, s/n T8106144, w/ Pwr Feed Table & Drawbar; ACRA AM-25 2hp Mill, s/n 970050(Ogden); ACER 3VK 3hp Mill, s/n 9508047H, w/ Pwr Feed Table & Drawbar; SHARP 3hp Mill; (2) DAKE 350 SUPER TECHNICSSA Cold Saws, s/n 0400971, 0400959; SCOTCHMAN CPO-350LT Cold Saw, s/n B95230113; UNI-HYDRO 42 Ton Hyd Ironworker; (2)GRIZZLY GO592 Horz Bandsaws, s/n 691792, 590476; RUTLAND 26” vertical band saw, s/n 945003; AMW GS-1632CH Hyd Surface Grinder, s/n 0411H-12; CINCINATTI GILBERT 4’x 12” Radial Arm Drill, s/n 5790; CARLTON 4’x 9” Radial Arm Drill, s/n 1A3361; ALSO; Engine Lathes; Shop Lathes; Shop Presses; Hyd Surface Grinders; Hand Feed Surface Grinders; Drill Point Grinders; Drill Presses;

FACTORY SUPPORT EQUIPMENT

Dumping Scrap Hoppers, Security Cage, Rolling Shop Carts, Motors, Drives, Scissor Tables, (2) Wheel Dollies, Parts Bins, Strapping Caddies and Tools, Job Boxes, Shop and Step Ladders, Personnel Lockers, Storage racks, Pneu & Elec. Hose Reels, conveyors, Shop Fans, Shop Vacs, Janitorial Equip. and Supplies, Large Quantity of Hand Tools, Bolt Cutters, Crimpers, All Sizes of Pipe Wrenches, hand Files, Electric Drills, Cordless Drills, RIDGID Pipe Benders & Cutters, C Clamps, Pry Bars, BESSEY Clamps, Tool Adapters Sets, GREENLEE Cable Cutters, Vise Grips, Hammers, Screw Drivers, Mitre Saws, ENERPAC Hyd. Jacks, Electric & Pneumatic Grinders, Nibblers, Saws, Sanders, Sledge Hammers, Routers, Cut-Off Saws, Staplers, Nailers, Levels, Pneumatic Hammer & Impact Guns, BUX DH50RP Mag Base Drills, Grinder Wheels, Discs, Brushes, Drills, Reamers, Hole Saws, Toolboxes, Steel Banding & Auto Strapping Tools, Large Assortment of Pipe Bending Dies, Perishable Tooling Including Drills, Reamers, Cutters, Carbide Inserts, Taps, V Flange Tools holders, Boring Bars

INJECTION MOLDERS & PLASTICS DEPARTMENT

(5) TOSHIBA 950 Ton Injection Moulding Presses; new as 2006, all with Robots; (10) TOSHIBA Injection Moulding Presses; 720 ton to 90 ton, most with Robots; (16) MAGUIRE WSB 240 & WSB 140 Weigh Scale Blenders; new as 2010; (6) GRANUTEC, CON AIR, IMS Granulators; up to 50 hp; ALSO; SILOS, CHILLERS, COOLING TOWERS, TEMPERATURE CONTROLLERS, HOT RUNNERS

MISCELLANEOUS

AM-QUIP 10 Ton x 55’ Overhead Bridge Crane; 2010 AEC Systems HD-812G-72×72-4000-W 72” Dia. Table Typhoon Wash System; (14) Vertical Machining Centers – Turning Centers – CNC EDM’s – CNC Mills – ALSO; Conventional Machine Tools, Ironworkers, Cold Saws, Horizontal Bandsaws, Mig & Tig Welders, Plasma Cutters, Assembly Lines, Auto Nylon Banders, Auto Stretch Wrappers, Compressors, Compactors w/ Enclosed Roll-Off Containers, Horizontal & Vertical Balers, Forklifts, Snorkel Booms, Scissor Lifts, Dumping Scrap Hoppers, Adjustable Pallet Racking, LISTA Cabinets, GREENLEE & KNACK Job Boxes, Electrical & Plumbing Hardware, Spare Parts & Motors, Factory Support Equipment