** PRE-AUCTION OFFERS ARE INVITED **

Loading included at no charge, export packing is additional.

FEATURED ASSETS:

CNC HORIZONTAL MACHINING CENTER:

• Okuma Space Center MA-600 HB CNC Horizontal Machining Center, OSP-P200 CNC Control with Color Monitor, Travels: X-39.37”, Y-35.43”, Z-39.37”, (2) 24.8” x 24.8” Pallets, 2640 Lb. Pallet Weight Capacity, 6000 RPM Spindle Speed, CAT 50 Taper, 60-Position Automatic Tool Changer, 40 HP Motor, Through Spindle Coolant, Chip Conveyor, S/N 124522 [2006] VIEW VIDEO / VIEW FULL DETAILS

CNC VERTICAL MACHINING CENTERS:

• Makino S33 CNC High Speed Vertical Machining Center, Travels: X-25.59”, Y-17.72”, Z-17.72”, Table Size: 23.6” x 15.7”, 880 Lb. Table Load Capacity, 130-13,000 RPM, 20-Position Automatic Tool Changer, CAT 40 Taper, 30 HP Motor, with Makino Pro-3 CNC Control, Shower Coolant, Air Blow, Full Enclosures, 9740 Cutting Hours, S/N V8002 [2002] VIEW VIDEO / VIEW FULL DETAILS
• Haas MDC-500 CNC Vertical Machining Center with Rotary Pallet Changer, Travels: X-20”, Y-14”, Z-20”, 2-Station Rotary Pallet Changer, 20” x 12.75” Pallets, 700 Lb. Table Load Capacity, 10,000 RPM, 24 ATC, CAT 40 Taper, 20 HP Motor, Programmable Coolant Nozzle, Rigid Tapping, Chip Auger, S/N 37583, [2005] VIEW VIDEO / VIEW FULL DETAILS

GEAR SHAPERS:

• Maag SH450/500S Large Capacity Gear Shaper, 206.55” Maximum Tip Circle Diameter, 69” Diameter Table, 12.7 Max. DP Pitch, 12-1000 Teeth, Infinite Helix Angle, 26” Max. Face Width, 77,000 Lb. Table Load Capacity, 27” Ram Stroke, 23.6” Table Bore Diameter, 51.2” Table Bore Length, Equipped With 69” Diameter Built In Rotary Table, 138” Diameter Sub-Plate, 186” Diameter Sub-Plate, JVE Internal Attachment, Cutting Coolant System, Chip Conveyer, Set of Change Gears, S/N 7588 VIEW VIDEO / VIEW FULL DETAILS
• Maag SH250 Large Capacity Gear Shaper, 98.4” Maximum Tip Circle Diameter, 12.7 Max. DP Pitch, 12-1000 Teeth, Infinite Helix Angle, 26” Max. Face Width, 33,000 Lb. Table Load Capacity, 27” Ram Stroke, 16.5” Table Bore Diameter, 47.2” Table Bore Length, Equipped With Allen Bradley PLC, 44” Diameter Table, 94” Additional Table, JVE Internal Attachment, 11” Risers, Cutting Coolant System, Chip Conveyor, Change Gears, Only 931 Cutting Hours, S/N 6891 VIEW VIDEO / VIEW FULL DETAILS

GEAR GRINDER:

• Maag HSS-60BC Gear Grinder, 12.59” Maximum Gear Width, 15 Maximum Module, 8-350 Teeth Range, S/N 6601 VIEW FULL DETAILS

GEAR CUTTING MACHINE:

• Klingelnberg S-35 10-Axis CNC Gear Cutting Machine, For Spiral Bevel and Hypoid Gears, 23.6” Maximum Diameter, 0.137”-0.393” Module, 0-60 Degree Spiral Angle, 0-35 Degree Spindle Tilt, 3.46”-7.12” Cutter Head Radius, -7 to 90 Degree Workpiece Swivel Range, with Schleicher Siemens CNC Control, Continuous & Single Indexing, Chip Conveyor, Bosch Drives, Mist Collector, S/N 380 VIEW VIDEO / VIEW FULL DETAILS

CNC ROTARY TRANSFER MACHINE:

• 2017 Porta Solutions Model TRV-08-N-16-90-110 CNC Rotary Transfer Machine, Siemens Sinumerik HT2 CNC Controls, 34-Controlled Axes Movements, 8 Machining Stations, 16 Work Spindles: (7) Vertical Spindles; (3) Y-Axis Boring Spindles; (3) Z-Axis Boring Spindles; (4) Independent XYZ-Axis Spindles, Spindle Head Types: FMU-90 and FMU-110, Spindle Speeds: 6000 & 15,000 RPM, Spindle Tapers: HSK 50, HSK 63, ISO 40, Automatic Tool Changer, High Pressure Coolant Filtration Unit, Meta-Porta Chip Conveyor, S/N 101196 [2017] VIEW VIDEO / VIEW FULL DETAILS

CNC VERTICAL BORING MILLS:

• Farrel 192”/252” Double Column CNC Vertical Boring Mill, (2) Rams, 192” Table, 252” Swing, 144” Height Under Rail, Table Speeds .5-48 RPM, 200 Ton Table Load Capacity, Ram & Saddle Feeds .001-999 Inch Per Revolution, Spindle Chiller, 100 HP, G & L 8000B CNC, S/N: 74R2040 VIEW FULL DETAILS
• 72” Giddings & Lewis High Column CNC Vertical Boring Mill, 12-Station ATC, (2) 72” 4-Jaw Independent Chucks with Pallet Shuttle, 96” Under Cross Rail, 62” Ram Stroke, Speeds 9-200 RPM, Chip Conveyor, #60 ANSI Taper, 75 HP, G & L 8000 CNC Control, S/N: 514-0046-98 VIEW VIDEO / VIEW FULL DETAILS

TABLE TYPE HORIZONTAL BORING MILLS:

• Giddings & Lewis G60-T CNC Table Type Horizontal Boring Mill, 6” Spindle Dia., #50 Taper, Travels: X-168”, Y-108”, W-63”, Z-36”, 72” x 168” Table, 60,000 lb Table Load Capacity, Speeds 10-1140 RPM, 40 HP, Fagor 8055i CNC, S/N: 450-20-78 [Retrofit 2005] VIEW FULL DETAILS
• IVO Table Type Horizontal Boring Mill, 5.12” Spindle Dia., ISO 50 Taper, X-86”, Y-78”, W-63”, Z-35.37”, 78” x 71” Rotary Table, 17,920 lb Table Load Capacity, Threading 2-96 TPI, Pendant, Threading, Heidenhain 4-Axis Readouts, Spindle Support, 26 HP, S/N 140449074 VIEW VIDEO / VIEW FULL DETAILS

FLOOR TYPE HORIZONTAL BORING MILLS:

• Union BFP130 CNC Floor Type Horizontal Boring Mill, 5.12” Dia. Spindle, Heidenhain TNC355 Control, ISO 50 Taper, Travels: X-275”, Y-118”, Z-16.55” (Column Infeed), W-35.43” (Spindle), Speeds 5-1000 RPM, Spindle Support, Hardend Ways, Way Covers, 50 KW Spindle Motor, S/N:12575 VIEW VIDEO / VIEW FULL DETAILS
• Giddings & Lewis G60-FX CNC Floor Type Horizontal Boring Mill, 6” Spindle Dia., 40 Station ATC, Travels: X-288”, Y-108”, Z-48”, Spindle Speeds 250-1120 RPM, CAT 50 Taper, Scales, Lubricool Chiller, Chip Conveyor, 40 HP Spindle Motor, G & L 8000B CNC Control, S/N 455-16-80 [Rebuilt & Retrofit by G & L] VIEW FULL DETAILS
• Scharmann HeavyCut WFT-150 CNC Floor Type Horizontal Boring Mill, 5.9” Spindle Dia., 11.8” x 11.8” Ram, CAT 50 Taper, Travels: X-712”, Y-138”, W-27.6” (Ram), Z-23.43” (Spindle), 51.03” Combined Ram & Spindle Travel, Speeds 5.5-1,000 RPM, Right Angle Head (Manual 1-Degree Indexing), 105 HP (78 Kw) Spindle Motor, Heidenhain TNC 407 CNC Control, 480/3/60 Electrics, S/N: 136003  (Note: Floor Plates Not Included) VIEW FULL DETAILS
• Skoda WD 160B Floor Type Horizontal Boring Mill, 6.3” Dia. Spindle, 17.7” x 17.7” Ram, Pendant Controls, #50 Taper, Travels: X-196”, Y-98.42”, Z-63” (Spindle) W-49.21”(Ram),  Speeds 2-800 RPM, Skoda Universal Angle Head, Chip Conveyor, Readouts, 50 HP, 440/3/60,   S/N: OB21162  (Floor Plates and Rotary Table Not Included) VIEW VIDEO / VIEW FULL DETAILS
• Toshiba Shibaura BF-13AQ Floor Type Horizontal Boring Mill, 5.12” Spindle Dia., #50 Taper, 7.09” Quill Dia., 13.4” Milling Sleeve Dia., X-236.22”, Y-98.4”, Z-35.4” Spindle Travel, W-13.78” Quill Travel, Speeds 4-800 RPM, Pendant Control, 3-Axis Digital Readouts, Hardened Ways, 30 HP, 230/460/3/60 Electrics, S/N: 133787 VIEW FULL DETAILS

CNC TURNING CENTER:

• OKUMA LU45 4-Axis CNC Turning Center, OSP 7000L 4-Axis CNC Control 33.07” Swing Over Bed, 21.85” Swing Over Saddle, 25.98” Max. Turning Diameter, 118” Distance Between Centers, 31” 4-Jaw Chuck, A2-11 Spindle Nose, Additional 15” 3-Jaw Chuck, 5.12” Spindle Bore, 12-2,800 RPM, 60 HP Main Motor, 12-Position Upper Turret, 10-Position Lower Turret, Tailstock, Electric Foot Switch, S/N: 0106 VIEW VIDEO / VIEW FULL DETAILS
• Tsugami NP-32 CNC Swiss-Type CNC Turning Center, Fanuc 0T CNC Control, 1.26” Max. Bar Diameter, 3.46” Front Turret (X1) Cross Travel, 4.52” Rear Turret (X2) Cross Travel, 8.46” Headstock (Z1) Travel, 8.46” Sub-Spindle (Z2) Travel, 5-Degree C-Axis Main Spindle, 4500 RPM Main Spindle Speeds, 10 HP Spindle, (2) 16-Tool Turrets, 5400 RPM Max. Rotary Tool Speed, 15-Degree Pickoff Spindle Indexing, With Front & Rear Turret, Pickoff Spindle, Sub-Spindle, LNS Bar Feed, S/N: 9026 VIEW FULL DETAILS

CNC & MANUAL LATHES:

• VDF Wohlenberg U-1270S CNC Gap Bed Lathe, 50” Swing x 282” Centers, 100” x 50” Gap, Boring Bar Attachment, 242” Between Centers (Gap Closed), 282” Between Centers (Gap Open), Steady Rest, 8-Position CNC Indexing Turret, Power Tailstock, Boring Bar Attachment, Spindle Speeds 2.24-450 RPM, 40” Face Plate, Allen Bradley 7360 CNC Control, 53.6 HP, S/N: D4177 VIEW FULL DETAILS
• Kuraki LC403 Hollow Spindle Lathe, 32” Swing Over Bed, 20.75” Over Carriage, 118.11” Between Centers, 12.6” Spindle Hole, (2) 24” Front & Rear Mounted 4-Jaw Chucks with 12.6” Holes, Inch/Metric Threading, Taper, 6-350 RPM, A2-20 Spindle, 30 HP, S/N: 228 VIEW VIDEO / VIEW FULL DETAILS
• Dainichi DLG-SHB 63 x 500 Manual Lathe, 24.8” Swing over Bed, 15.74” Over Carriage, 196.85” Between Centers, 35.43” In Gap, 9-1600 RPM, Inch/Metric Threading, Taper Attachment, 18” 4-Jaw Rohm Chuck, 2-Axis Readouts, 9”, 12.5”, 16.5” Roller Type Steady Rests, Chip Pans, 7.5/15 KW, (10/20 HP), S/N: 17690 VIEW FULL DETAILS
• Haas TL-3W CNC Lathe, 30” Swing Over Bed, 18” Swing Over Cross Slide, 60” Maximum Cutting Length, 15” 6-Jaw Manual Chuck, 3.5” Diameter Spindle Bore, 1800 Max. RPM, 16” X-Axis Travel, 60” Z-Axis Travel, 30 HP Motor, Haas CNC Control, Tool Post, Tailstock, S/N: 73138 [2006] VIEW FULL DETAILS

KEYSEATER:

• LEISTRITZ POLYMAT 70/600 CNC KEYSEATER, 2.75” Keyway Width, 23.6” Stroke, 35.4” x 44.8” T-Slotted Table, Servo Positioning for Cutting Tapered Keyways, Fixture Table Support for Long Parts, Remote Operators Station, Tooling, Siemens Sinumerik FM357 Control, S/N: 3.10.05 [2013]  VIEW FULL DETAILS

CNC CYLINDRICAL GRINDER:

• 48” X 120” LANDIS CNC CYLINDRICAL GRINDER, Fanuc 0-GC CNC Control, 48” Swing, 120” Centers, 30” x 3” Max. Wheel Capacity, 20 HP Wheel Drive Motor, 5 HP Workhead Motor, with 24” x 3” x 12” Wheel, Dynamic 2500 Wheel Balancer Control, Coolant System, S/N 832-20, Rebuilt & CNC Retrofit in 1995 VIEW FULL DETAILS

CNC SURFACE GRINDER:

• MATTISON 24-42 ROTARY SURFACE GRINDER, 48” Swing Inside Guards, 42” Magnetic Chuck Diameter, 24” Max. Height Under Wheel, 8-32 RPM Chuck Speeds, 0.005-.165” Wheelhead Feeds, 100 HP Main Motor, With 42” Magnetic Chuck, Automatic Downfeed, Power Rapid Traverse, Trabon Lube System, Wheel Dresser, Coolant, S/N 24-646 

CNC VERTICAL GRINDER:

• CAMPBELL 3642-18D 36” DUAL-SPINDLE CNC VERTICAL GRINDER, 36” Table Diameter, 42” Maximum Grinding Diameter, 8-180 RPM Table Speed, 250-2000 RPM Left Grinding Spindle Speeds, 1500-10,000 RPM Right Grinding Spindle Speeds, 20” Vertical Slide Movement, 18” Maximum Height Under Rail, 32” Horizontal Slide Movement, +/-90 Degree Angle Slide Swivel, 8” Angle Slide Travel, 16” OD/5” ID Grinding Wheel Capacity, 7.4 HP Left Grinding Spindle Motor, 10 HP Right Grinding Spindle Motor, 14.7 HP  Table Motor, With Fanuc 15MB CNC Control, 36” T-Slotted Table, Left & Right Spindles, Bellows Way Covers, Coolant System, Donaldson Torit Dryflo DMC-D2 Mist Collector, Rebuilt & Retrofit 1998 by Estec Corporation, S/N 970311  VIEW FULL DETAILS

PRESSES:

• HPM HD52-150-60 150 Ton Straight Side Press, Bed Area (Left-Right x Front-Back) 67” x 60”, 60” x 60” Ram, 24.5” Open Height, 11.5” Closed Height, 13” Stroke, 75 HP Hyd. Motor, Allen Bradley Panel View Control, Pedestal Mounted Controls, Halatechnik Blanking Stroke Damper System, Banner Light Curtain VIEW FULL DETAILS
• Dake 50 Ton Spotting Press, 48” x 60” Bed, 54” Between Posts, 60” Daylight, 44” Stroke, Sliding Bolster, 15 HP Main Motor, S/N: 164339 VIEW VIDEO / VIEW FULL DETAILS

MITRE SAW:

• FOM Blitz Alva 500M Dual Head Non-Ferrous CNC Programmable Mitre Saw, 19.7” Blade Dia., 20 – 90 Degree Miter Range, 160” Max. Cutting Length, CNC Control, (1) Fixed Head, (1) Traveling Head, S/N: 021010, New 2006 VIEW VIDEO / VIEW FULL DETAILS

HYDRAULIC PLATE SHEAR:

• Pacific 500R16 1/2” x 16’ Hydraulic Plate Shear, 48” Power Back Gauge, 8’ Squaring Arm, Ball Transfers in Table, Electric Foot Control, (4) Front Support Arms, S/N: 10842, 1977 VIEW FULL DETAILS

WELDING POSITIONERS:

• JENNINGS GEAR DRIVEN 150,000 LB. WELDING POSITIONER, 240” Dia. Table, 75 HP Tilt Motor, 40 HP Rotation Motor VIEW FULL DETAILS
• RANSOME 100P 10,000 LB. WELDING POSITIONER, Variable Speed Rotation, 60” Diameter Table, Pendant Control, Manually Adjustable Base VIEW FULL DETAILS

DEBURRING & FINISHING MACHINES:

• STEELMASTER PRIMA W209-RD 37”  WET DEBURRING & FINISHING MACHINE, (1) Sanding Drum Head, (1) Scotchbrite Drum Brush Head, Work Piece Thickness 0.01962”- 4.72”, S/N: 0418260067, 2005 VIEW FULL DETAILS
• HAVEN 912A DOUBLE END TUBE FINISHING MACHINE, O.D. Capacity 0.50-3”, Wall Thickness Capacity  0.028”-0.12”, Cycle Rate 2400 Pieces/Hour, Automatic Load System Digital Length Adjustment S/N: 4975 VIEW FULL DETAILS

FEEDER & STRAIGHTENING MACHINE

• COILMATIC XCFA-3030 FEEDER & STRAIGHTENING MACHINE, .030-.025 x 30” Max. Material Width, 30” Stroke, Single Grip, Manual Entry Guide, S/N 0157 VIEW FULL DETAILS

ROTARY TABLES:

• Giddings & Lewis 360C 84” x 96” B-Axis CNC Rotary Table
• Giddings & Lewis 84” x 108” Hydrostatic Rotary Table
• Giddings & Lewis 84” x 120”  Hydrostatic Rotary Index Table Giddings & Lewis 96” x 120” Hydrostatic Rotary Index Table
• Waldrich 120” Round B-Axis CNC Rotary Table
• Giddings & Lewis 96” x 120” Airlift Rotary Index Table
• 86” x 86” TOS ISO16 Infeeding Power Rotary Table
• Giddings & Lewis 84” x 96” Hydrostatic Rotary Table
• Skoda E20 78” x 108” Infeeding Rotary Table
• 71” x 78” Union Ti-1800 Power Cross Sliding Rotary Table
• Giddings & Lewis 360P 72” x 96” CNC Rotary Table
• Carlton (Cincinnati Gilbert) 60” x 84” Infeeding Rotary Table
• 36” x 48” Giddings & Lewis Airlift Rotary Table
• Lucas Airlift Rotary Table 36” x 48”

TREMENDOUS QUANTITY OF ANGLE PLATES, T-SLOTTED FLOOR PLATES, CHUCK JAWS, LEVELING PADS, TOOL HOLDERS, CABINETS, FORKLIFT, SHOP SUPPORT, TOOLING AND MORE!