* PRE-AUCTION OFFERS ARE INVITED *

ADDITIONAL MACHINES ADDED! – HUGE SCRAP OPPORTUNITY!

FEATURED ASSETS:

LARGE CAPACITY MANUAL LATHES:

• Betts Bridgeford 128” x 612” Manual Lathe, 120” Face Plate Chuck w/4-Jaws, .75 – 48 RPM, 128” Over Bed, 75 Ton Weight Capacity, Pendant Control, 3-Way Bed, 96” Bed Width, 16” Tailstock Quill Diameter, (2) 70” Steady Rests, (2) 38” Steady Rests, 65 HP Main Motor w/MG Set, S/N: E8488 VIEW VIDEO / VIEW LOT #240
• Niles 66” x 336” Manual Lathe, Speeds 1.07-126 rpm, 42” 4-Jaw Chuck, 11.5” Diameter Tailstock Quill 17” & 27.5” Roller Type Steady Rests, 50 HP VIEW VIDEO / VIEW LOT #70
• Bridgeford 48” x 300” Manual Lathe, Speeds 3.7-98 RPM, 48” 4-Jaw Chuck, Taper Attachment, 19” & 29.5” Diameter Steady Rest VIEW VIDEO / VIEW LOT #141
• Leblond 42” x 480” Model 32 Manual Lathe, 32” 4-Jaw Chuck, Speeds (16) 4-500 rpm, Threading (64) 3/4 to 44 TPI, Feeds (64) .004-.230 IPR, 6” Tailstock Quill, Taper Attachment, (4) Steady Rests 21.5”, 15”, 11”, 5.5”, Thread Dial, 25 HP. S/N: N/A VIEW VIDEO / VIEW LOT #239
• American Pacemaker 42” x 228” Manual Lathe, 32” 4-Jaw Chuck, Speeds: 2-200 rpm, Feeds: .0040-.240, Threading: 1-30 TPI, 5.5” Diameter Tailstock Quill, (6) Steady Rests, Thread Dial, 20 HP, S/N: 2218707 VIEW VIDEO / VIEW LOT #238
• American Pacemaker 32” x 204” Manual Lathe, 32” x 204”, Speeds 6-600 rpm, 24” 4-Jaw Chuck, Feeds: .0040- 1.00 IPR, Threading .5-30 TPI, 5” Diameter Tailstock Quill, 13” & 10.5” Steady Rest, Thread Dial, 30 HP VIEW VIDEO / VIEW LOT #237

HORIZONTAL BORING MILLS:

• TOS W-100 Table Type Horizontal Boring Mill, 4” Spindle Dia., #5MT, 49” x 49” Built-In Rotary Table, Travels, X-63”, Y-44” W-49”, Z-35”, Spindle Speeds 7.1-1120 RPM, 22” Diameter Facing Head, Outboard Support,  S/N: 42-01 VIEW VIDEO / VIEW LOT #146
• Giddings & Lewis 360F Floor Type Horizontal Boring Mill, 6” Spindle Dia., Travels: X-120”, Y-84” Z-48”, 8.5 – 800 RPM, Pendant, Pointfinder 2-Axis DRO, #7 Morse Taper, S/N: 190-44-58 VIEW VIDEO / VIEW LOT #158

VERTICAL TURRET LATHES & VERTICAL BORING MILLS:

• 54” Bullard Spiral Drive Vertical Turret Lathe, Turret & Side Head, High Column, Approx. 72” Under Cross Rail, 54” 4-Jaw Chuck, 3.5 – 60 RPM, 25 HP, 440v, S/N: 12624 VIEW VIDEO / VIEW LOT #69
• 54” Bullard Spiral Drive Vertical Turret Lathe, Turret & Side Head, 42” Under Cross Rail, 54” 4-Jaw Chuck, 3.5 – 60 RPM, Sony Magna-Scale 4-Axis Digital Read Out System, 25 HP, 440v, S/N: N/A VIEW VIDEO / VIEW LOT #68
• 42” Bullard Spiral Drive Vertical Turret Lathe, Turret & Side Head, 33” Under Cross Rail, 42” 4-Jaw Chuck, 4.1 – 70 RPM, 25 HP,  S/N: 10215 VIEW VIDEO / VIEW LOT #144
• Pond 120″ Vertical Boring Mill, 72″ Ram Stroke, 96″ Under Rail Height VIEW VIDEO
• Custom Shop Built 120” Vertical Boring Mill, 12” Ram Stroke, 36” Under Rail Height
• Betts 96″ Vertical Boring Mill, 12″ Ram Stroke, 40″ Under Rail Height VIEW VIDEO

WHEEL PRESS:

• American 600 Ton Wheel Press, Part Capacity 96” x 34’ (Approximate) VIEW LOT #241

GRINDER:

• Mattison 30” x 192” Horizontal Surface Grinder, 24” Under Wheel, 6” x 20” Wheel, (2) 60” x 30” Magnetic Chucks (1) 72” x 30” Magnetic Chuck, Filtration System, 30 HP S/N: 1371 VIEW LOT #71

PLANER MILL:

• Sellers Planer Mill, 120” x 437” Table, 30 HP, Futurmill Vertical & Horizontal Milling Heads 56-870 RPM VIEW VIDEO / VIEW LOT #236

CNC GUN DRILL:

• Tarus Model TPEXHGD412 CNC Gun Drill, Lemoine G6 CNC Control (Retrofit 2018), 1.5” Max. Drilling Diameter, 144” x 60” T-Slotted Table, Travels: X-87”, Y-50”, Z-16”, W-90”, 2000 RPM, 40,000 Lb. Work Weight Capacity, 15 HP Motor, Chip Conveyor (Located in Illinois) VIEW LOT #242

CNC HORIZONTAL MACHINING CENTERS:

• Dah Lih MCH-630 CNC Horizontal Machining Center, Fanuc 18M CNC Control, Travels: X-39.4”, Y-34.8”, Z-32.7”, Dual 24.4” x 24.4” Pallets, 60-Position Automatic Tool Changer, #50 Taper, 6000 RPM, 25 HP Motor, Chip Conveyor (Located in Wisconsin) VIEW LOT #243
• Toyoda FH-50 CNC Horizontal Machining Center, Fanuc 15M CNC Control, Travels: X-27.8”, Y-22”, Z-22”, Dual 19.7” x 19.7” Pallets, 48-Position Automatic Tool Changer, #50 Taper, 5000 RPM, 25 HP Motor, Chip Conveyor (Located in Wisconsin) VIEW LOT #244
• Okuma MX-50HB CNC Horizontal Machining Center, OSP-U100M CNC Control, Travels: X-27.56”, Y-31.5”, Z-27.56”, Dual 19.7” x 19.7” Pallets, 40-Position Automatic Tool Changer, 5000 RPM, 20 HP, Probe, Chip Blaster (Located in Wisconsin) VIEW VIDEO / VIEW LOT #245

CNC VERTICAL MACHINING CENTERS:

• YCM Model V218B CNC Vertical Machining Center, Fanuc 18M CNC Control, Travels: X-82.67”, Y-33.85”, Z-30”, Table Size: 90.55” x 33.85”, 30-Position Automatic Tool Changer, 4000 RPM, 20 HP Motor, Chip Conveyor (Located in Wisconsin) VIEW LOT #246

CNC BRIDGE MILL:

• Mighty Viper VMC 2000 GXT CNC Bridge Mill, 82” x 59” Table, 3800 RPM, Mitsubishi 500 CNC Control (Located in Wisconsin) VIEW LOT #247

CNC TWIN-SPINDLE VERTICAL LATHE:

• G-Net Twin-Merit TM-15 Twin Spindle CNC Vertical Lathe, Fanuc 18-TT CNC Control, Twin 15” 3-Jaw Chucks, 3,000 RPM, 12-Position Vertical Turrets, Twin Rear-Exit Chip Conveyors (Located in Wisconsin) VIEW LOT #248

FABRICATING EQUIPMENT:

• Sub-Arc Dual Head Welding System w/ (2) Lincoln NA 35 Wire Feeds, Lincoln Welders VIEW LOT #223
• Worthington 2500 Lbs. Welding Positioner, 32” x 32” Table, 20” 4-Jaw Chuck, S/N: N/A VIEW LOT #222
• CF Model 60 6000 Lbs. Welding Positioner, 72” Diameter Table, S/N 6581 VIEW LOT #235
• Sub Arc Welding System, w/Lincoln Welder and NA 35 Wire Feed, Headstock w/88” Diameter Face Plate, (2) Heavy Duty 63” Diameter Steady Rests VIEW LOT #230 / VIEW LOT #230A
• 52” Diameter Welding Positioner VIEW LOT #234

ADDITIONAL EQUIPMENT:

• American 16” x 48” Radial Drill VIEW LOT #272
• Cincinnati 14” x 36” Cylindrical Grinder S/N: 28486 VIEW LOT #154
• Heald No. 25A Horizontal Spindle Rotary Surface Grinder VIEW LOT #156
• Fein Magnetic Base Drill VIEW LOT #64
• Jancy MT3 Slugger Max 4×4 Magnetic Base Drill VIEW LOT #65
• Black & Decker Magnetic Base Drill VIEW LOT #61 / VIEW LOT #62
• Kwik Way Model FN Cylinder Boring Machine VIEW LOT #66
• Phoenix Type 300 Dry Rod Oven VIEW LOT #51 / VIEW LOT #52 / VIEW LOT #53
• Climax Portable Key Cutter Mill VIEW LOT #42
• Chatillon 5,000 Lb. Hanging Scale VIEW LOT #186
• 60″ x 122″ T-Slotted Floor Plate VIEW LOT #219
• 84″ x 168″ T-Slotted Floor Plate VIEW LOT #169
• 122″ x 120″ T-Slotted Floor Plate VIEW LOT #170
• Smith & Famco Bench Type Arbor Presses VIEW LOT #83
• Contents of Tool Crib; Assorted Drill Bits, Reamers, Nuts & Bolts, Wrench Sockets, Honing Stones, Storage Cabinets, Misc VIEW LOT #184

MISC. EQUIPMENT:

• Baker Bros. No. 2 Vertical Keyseater, Pratt & Whitney Slotter-66 Vertical Slotter, Monarch Manual Lathes with Taper Attachment, Van Norman Vertical & Universal Mills, Supermill Vertical Mill, Cincinnati #5 Horizontal Mill, Kearney & Trecker #3 Horizontal Mill, Smith-Dolan Induction Heat Treating System, Fixture Plates, Floor Plates, Rotary Tables, Inspection Equipment Including Micrometers & Calipers, Pneumatic Hand Tools, Hand Tapping Sets, Lifting/Rigging Equipment, Welding Wire & Flux, Portable Welders, Welding Hoses, Welding Positioners, Welding Manipulators, Dry Rod Ovens, Hydraulic Jacks & Pumps, High Speed Drill Bits, Crane Scales,  Hydraulic Units, Double End Grinders, Chuck Jaws, Cabinets and Lockers, and Much More!