FEATURED ASSETS:

CNC VERTICAL BORING MILL:

• 144” Gray Series 300 CNC Vertical Boring Mill, GE Fanuc 0-T CNC Control, 144″ 4-Jaw Chuck, 152″ Swing, 2- Vertical Ram Heads, 96” Ram Stroke, 126” Height Under Rail, 350,000 Lbs. Table Capacity, Dual Chip Conveyors, Fanuc Red Cap Servos, 125 HP Table Motor, S/N 9510 [Rebuilt & Retrofit 2002] VIEW VIDEO / VIEW LOT #111

CNC HORIZONTAL BORING MILL:

• 5.12″ Ikegai NB-130P CNC Horizontal Boring Mill, Fanuc 16i-MA CNC Control, Travels: X-118.11″, Y-78.74″, Z-62.99″, W-27.55”, 62.99” x 70.86” B-Axis Rotary Table, .001 Degree Indexing, 60 ATC, CAT 50, Chip Conveyor, 35 HP Spindle Motor, Thru Spindle Coolant, S/N A734 #04 [1999] VIEW VIDEO / VIEW LOT #112

LARGE CAPACITY HEAVY DUTY LATHE:

• 78” x 275” Poreba TCG-200/7M Heavy Duty Lathe, 78.74” Swing Over Bed, 275.6” Between Centers, 63” 4-Jaw Chuck, 66.14” Swing Over Carriage, Spindle Speeds 0.8-160 RPM, 4.13” Spindle Bore, Inch/Metric Threading, 66,000 Lbs. Weight Capacity (Unsupported), 88,000 Lbs. (2 Steadies), Equipped With Steady Rest, Power Tailstock, 100 HP Spindle Motor, Sony 2-Axis Digital Readouts, S/N 1173-310, [1989] VIEW LOT #113

5-AXIS CNC VERTICAL MACHINING CENTER:

• 2013 Mazak VCC-5X 20K 5-Axis CNC Vertical Machining Center, Mazatrol Matrix 2 CNC, Travels: X-20.49”, Y-16.95”, Z-20.04”, Table: 25.7” x 15.7”, 20,000 RPM, 30 ATC, CAT 40, With Sankyo RT100 x RBI-X 2-Axis Rotary Table, Thru Spindle Coolant, S/N 246735, 7,632 Cutting Hours [2013] VIEW LOT #122

CNC VERTICAL MACHINING CENTERS:

• 2015 Mazak Nexus VCN-700D/40-II CNC Vertical Machining Center, Matrix Nexus 2 CNC, Travels: X-60.24″, Y-27.66″, Z-25.59″, Table: 68.5″x 27.56″, 12,000 RPM, 30 ATC, CAT 40, Renishaw Probe, Chip Conveyor, 4,342 Cutting Hours, S/N 268806 [2015] VIEW VIDEO / VIEW LOT #117
• 2017 Mazak VCN-430B CNC Vertical Machining Center, Mazatrol SmoothG CNC, Travels: X-30″, Y-16.93″, Z-20″, Table: 43.31” x 16.93”, 15,000 RPM, 30 ATC, CAT 40, Renishaw Probe, Chip Conveyor, High Pressure Coolant, S/N 280618 [2017]
  VIEW LOT #120
• 2017 Mazak VCN-430B CNC Vertical Machining Center, Mazatrol SmoothG CNC, Travels: X-30″, Y-16.93″, Z-20″, Table: 43.31” x 16.93”, 15,000 RPM, 30 ATC, CAT 40, Renishaw Probe, Chip Conveyor, High Pressure Coolant, 3,062 Cutting Hours, S/N 280028 [2017] VIEW VIDEO / VIEW LOT #121
  
• 2015 Mazak VCN Smart 510C CNC Vertical Machining Center, Mazatrol Smart CNC, Travels: X-41.34”, Y-20.87”, Z-20”, Table: 51” x 21.6”, 12,000 RPM, 30 ATC, CAT 40, Renishaw Probe, Chip Conveyor, High Pressure Coolant, S/N 266300 [2015] VIEW VIDEO / VIEW LOT #119
• 2006 Mazak VCN-510C 2APC CNC Vertical Machining Center, Mazatrol 640M CNC, Travels: X-41.34”, Y-20.87”, Z-20”, (2) 51.18” x 21.6” Pallets, 2APC, 12,000 RPM, 50 ATC, CAT 40, Probe, Concep2000 Chip Conveyor, Thru Spindle Coolant, S/N 184474 [2006] VIEW VIDEO / VIEW LOT #118

CNC TURNING CENTERS:

• 2016 Mazak QT-Universal 250M CNC Turning Center, Mazatrol Smart CNC Control, 26.5” Swing, 19.87” Max. Turning Length, 12-Station Turret, Live Milling & C-Axis, 4000 RPM, 35 HP, Tool Eye, Tailstock, ATS-ML Magazine Bar Feed, Chip Conveyor, 2,440 Cutting Hours S/N 266288 [2016] VIEW VIDEO / VIEW LOT #116
  
• 2015 Mazak QTN 350-II-M CNC Turning Center, Matrix Nexus 2 CNC Control, 29.53” Swing, 60.6” Max. Turning Length, 15″ Chuck, 12-Station Turret, Live Milling & C-Axis, 3300 RPM, 40 HP, 4” Max. Bar Work, Tool Eye, Tailstock, Chip Conveyor, 3,053 Cutting Hours, S/N 268852 [2015] VIEW VIDEO / VIEW LOT #115
  
• 2006 Mazak QTN-450-II CNC Turning Center, Matrix Nexus CNC Control, 33.27” Swing, 118” Bed Length, 21″ Chuck, 12-Station Turret, 6″ Max. Bar Work, SMW Autoblok Programmable Steady Rest, Tool Eye, Tailstock, Chip Conveyor, 5,221 Cutting Hours, S/N 186506 [2006] VIEW VIDEO / VIEW LOT #114

CNC EDM MACHINES:

• 2018 Chmer RX-1063S CNC Wire Cut EDM, CNC Model CD325G7A Control, Travels: X-39.3”, Y-23.62”, U-6.29”, V-6.29”, Z-19.69”, Max. Work Dims: 48.81” x 35.4” x 19.48”, 6600 Lb. Max. Work Weight, Paper Filter, S/N P17070315 [2018] VIEW LOT #126
  
• Charmilles Robofil 310 Wire Cut EDM VIEW LOT #127
  
• Mitsubishi VX10 CNC Sinker EDM, Mitsubishi CNC Control, Pendant, System 3Robomatic 15-ATC, 27.559″ x 19.685″ Table, Travels X-13.779″, Y-9.842″, Z-13.779″, S/N 07V10256, [1997] VIEW LOT #128
  
• Sodick AM35 EDM CNC Sinker EDM, 16 ATC, Neuro Fuzzy II 80 CNC Control VIEW LOT #129

CNC VERTICAL MILL:

• 2006 Trak DPM2 CNC Milling Machine, Prototrack SMX CNC Control, 44″ x 9″ Table, Accu-rite Scales, S/N 071CR15056 [2006] VIEW LOT #123

CLIMAX PORTABLE BORING MACHINES:

• 2018 Climax CM6200 Portable Boring Machine, 10 HP Hydraulic Unit, (13 Crates) [2018] VIEW LOT #124
• 2018 Climax BB5500 Portable Boring Machine, 5 HP Motor [2018] VIEW LOT #125

GRINDING DEPARTMENT:

• 2017 16” x 32” Acra ASG-1632HS Horizontal Surface Grinder, 16” x 32” Magnetic Chuck, Coolant Filtration System, S/N 1743036 [2017] VIEW LOT #132
  
• 42″ x 144″ Mattison Horizontal Surface Grinder, (3) 48″ x 42″ Magnetic Chucks on 42″ x 152″ Table, Flux-Master Magnetic Chuck Control, 48″ Max. Height Under Wheel, 50 HP, 18″ Wheel, Magna-Loc Flux-Master Chuck Control, Ebbco Chiller & Filtration System, S/N 21541 [Rebuilt In 2012 By Dial Industries] Note Location: Wausau, Wisconsin. VIEW VIDEO / VIEW LOT #132A
• 12″ x 24″ Okamoto ACC-124N Horizontal Surface Grinder, 12” x 24” Magnetic Chuck, Walker Chuck Controls, Coolant System, S/N 7628 VIEW LOT #133
  
• (6) Harig 612 Horizontal Surface Grinders, 5″ x 10″ Chuck, DRO, Walker Chuck & Controls
• Toyoda GUP40-120 Universal OD/ID Grinder, Mfg #TG2119-1, Machine #RB-8805, 20″ Swing, 48″ Between Centers, 2-Axis Accu-rite Digital Readouts VIEW LOT #130
  
• Jainnher JHC-18B Centerless Grinder, S/N 18428 [1995] VIEW LOT #131
  
• 6”/10” Rockford Belt & Disk Sander VIEW LOT #130
  
• Double-End Pedestal & Bench-Mounted Grinders

MISC. MACHINERY & OTHER ITEMS:

• Dake H-Frame Press, Model 50H-4SG, S/N 1374429 VIEW LOT #142
  
• 236”x 96” Steel T-Slotted Floor Plate
  
• MAS VR-4 Radial Arm Drill, 5′ Arm, Box Table, SN 9715 VIEW LOT #141
  
• Blast Cabinets
  
• L & L Kiln / Oven VIEW LOT #148
  
• Mark Forged Desktop 3D Printer VIEW LOT #251
  

INSPECTION:

• Faro ION Laser Tracker System, S/N MT000963-R0002-2 [2011] VIEW LOT #248
  
• 16″ Deltronic DH214 Bench Comparator, S/N 229102997 VIEW LOT #246
  
• 14″ J & L Basic 14 Comparator, S/N 80233 VIEW LOT #245
  
• 14″ ST Bench Type Comparator VIEW LOT #247
• Phase II Hardness Tester VIEW LOT #285
  
• Misc. Inspection Equipment Including Gage Sets, Micrometers, Calipers, Etc.
  

PIPE TORCH CUTTER:

• Dayton Pipe Torch Cutter, 224″ Length VIEW LOT #82A

SAWS:

• Cosen AH-320H Horizontal Band Saw, Roller Conveyor, Mfr #H10428502 [2015] VIEW LOT #143
• Clausing Start-Rite HB28M Horizontal Band Saw, S/N 152878 [1996] VIEW LOT #144

WELDING DEPARTMENT:

• Huge Quantity Of Miller Welders & Wire Feeders, SuitCase 12RC Portable Wire Feeders, Wire Wizards, Steel Welding Tables, Positioner, Screens, Stands, Clamps, Etc.

VEHICLES & TRAILER:

• 2016 Dodge Ram 3500 HD Truck, Cummins Turbo Diesel, 77,423 Miles, VIN# 3C7WRTCL2GG297269, [2016] VIEW LOT #327 
  
• Dodge Ram 3500 V8 Flat Bed Truck [1998] VIEW LOT #328
  
• 2018 Kaufman Deluxe 38500 GVWR Flatbed Tilt Gooseneck Trailer Bed, 30’ Length, VIN# 5VGFH3032KL002530 [2018] VIEW LOT #329
  

FORKLIFTS, MATERIAL HANDLING & ROLLING STOCK:

• Hyster S120XMS LP Fork Truck, 12,000 Lbs. Capacity, S/N F004V02551B VIEW LOT #301
• CAT Model 2C5000 LP Fork Truck, 4,750 Lbs. Capacity, S/N AT9033858 VIEW LOT #302
  
• CAT Model GC25K LP Fork Truck, 4,450 Lbs. Capacity  VIEW LOT #303
  
• 2000 Lb. Spanco Crane VIEW LOT #333
  
• Tennant 5680 Floor Sweeper VIEW LOT #305
  
• SkyJack Scissor Lift VIEW LOT #304
  
• Pallet Jacks
  
• Large Quantity of Rigging Equipment, Including Lifting Straps, Chains, Eyebolts, Etc.
  
• Enerpac Magnetic Lifters
  
• Heavy Duty Shelving & Cantilever Racking
  
• (2) 20’ Shipping Containers

AIR COMPRESSORS:

• Kaeser AS30T Air Compressor, 30 HP, S/N 1059, [2017] VIEW LOT #385
  
• Kaeser SK20 Dryer, 20 HP, S/N 1799 [2015] VIEW LOT #387
  
• (2) Air Tanks
  

CLEAN ROOM:

• Free Standing Steel Frame Construction, Foam Panel Walls, Approx. 207′-7″ x 82′-9″ x 19′-7″ (LxWxH), (2) 16′ x 16′ Bay Doors, (2) Man Doors, LED Lighting, Siemens 2000A Switch Board, Eaton V48M28T22 225 KVA Dry Type Transformer, Siemens P4C75M1700ABS 800A Breaker Panel, (16) Tiger Profiles Spare Panels

HIGH QUALITY OFFICE EQUIPMENT:

• Including Executive Desks, Chairs, Conference Tables, Etc.
  

PLUS:

• Large Quantity of Kurt Vises, Vidmar Tool Cabinets, Jobox and Knaack Tool Chests, CAT 40 & 50 Tool Holders, Perishable Tooling, Hand & Power Tools, Fixtures, Banding Carts, Flammable Safety Cabinets, Portable Construction Heaters, Spare Electrical parts, Bus Duct, Electrical Cabinets, and More!