CNC COUNTER ROTATING DEEP HOLE BORING MACHINES

• (4) WOHLENBERG MDL. PB2-1000B, Fanuc 21i-TB CNC control, rack drive design, 39.37” swing over bed, 157″ max. boring depth, 100 KW headstock, 100 KW drill drive motor, 24-3/4″ 3-jaw chuck, (2) manual damper rests, chip conveyor & swarf system, paper filter separator, Koolant Koolers coolant refrigeration system, 3,000 LPM cap. coolant system, 15′ x 6′ x 6′ above ground coolant storage tank, S/N D4584 new 2006 (currently installed) S/N D4602, S/N D4603, S/N D4604 – these machines were built in 2008, are unused & were never installed

BORING MACHINE TOOLING

• BORING BARS, including: 6-1/2″, 5-1/2″, 5″, 4-1/2″, 4″, 3-1/2″, 3″, (2) 2-3/4″, 2-1/2″, (2) 2″ & 1-3/4″; WIDE SELECTION CUTTER HEADS, SLEEVES, DAMPERS, PRESSURE HEADS, & LANTERN CHUCK 

TRAVELLING COLUMN CNC HORIZONTAL MACHINING CENTERS

• (4) SHW MDL. POWER SPEED 5, new 2007, Heidenhain TNC530 CNC control, 39.37” x 354.3” T-slotted work table, 314.96” X, 63” Y, 51” Z-axis travels, 1181 IPM rapids, 360 deg C axis head swivel, 180 deg. A axis head swivel, CAT-50 spdl. taper, spdl. spds: 36-6000 RPM, 45 KW spdl. drive motor, 90 pos. ATC, Roll Work Holding & Rotation System Including: FIBRO CNC B-axis vert. rotary table w/13.77” thru hole, 27.5″ center height, 5500 lb. max. rotary table cap., 27.5” 4-jaw chuck, (3) Autoblock hyd. Steady rests, 3.93” to 13.77” cap., probe system, (1) manual support rest, scale feedback system, roller chip shields, S/N 5236, S/N 5237, S/N 5238, S/N 5239

CNC COMBINATION VERTICAL TURNING AND MACHINING CENTER (MILLTURN)

• DORRIES SCHARMANN MDL. SOLON 3/DS, Siemens 840 CNC control, 49.6” pallet dia., 4400 lb. max. pallet weight, 61.02″ max. working height, 59” X-axis travel, 47.2” Y-axis travel, 49.6” Z-axis travel, contouring B-axis rotary table, milling spdl. spds: 73-4000 RPM, CAT-50 spdl. taper, 45 KW milling spdl., turning table spds: 1-500 RPM, 48 KW turning drive 161 pos. ATC, Renishaw touch probing, chip conveyor, mist collector, twin pallet changer, aux. tooling storage rack, S/N 123631

CNC LATHES

• LODGE & SHIPLEY MDL. 1540U SLANT BED, G.E. 1050 CNC control, 12 pos. vert. turret, tailstock, approx. 96″ dist. btn. centers, 15″ dia. 3-jaw chuck, 3.5″ spdl. hole, hyd. steadyrest on independent slide, chip conveyor, S/N 50789

CNC HOLLOW SPINDLE LATHES

• (2) LODGE & SHIPLEY MDL. PROFITURN 40, rebuilt & retrofitted 2015 w/Fanuc 0iTD CNC control, 34-1/2″ sw. over bed & carriage wings, 20″ sw. over crosslide, spds: 6-650 RPM in (3) ranges, 12-1/2″ spdl. hole, 14′ dist. btn. centers, 4 pos. sq. turning turret, 12 pos. hex boring turret, 45 KW main spdl. drive motor, front & rear 28″ dia. 4-jaw chucks, outboard work suppt. rest w/pneu. lift, roller jaw steadyrest, pwr. tailstock, additional control axis for customized tooling, full length chip conveyor, S/N 50786, S/N 50938 (Auctioneers Note: S/N 50938 – is 90+% finished on rebuilt & retrofit. The bid for finishing this machine will be available at time of inspection)
• (2) LODGE & SHIPLEY MDL. PROFITURN 40, Fanuc 18iT CNC control, 34-1/2″ sw. over bed & carriage wings, 20″ sw. over crosslide, spds: 6-650 RPM in (3) ranges, 12-1/2″ spdl. bore, 14′ dist. btn. centers, 8 pos. sq. turning turret, 12 pos. hex boring turret, interchangeable 4 pos. turning turret & 6 pos. boring turret, 37 KW main spdl. drive motor, front & rear 32″ dia. 4-jaw hollow spdl. chucks, outboard work suppt. rest w/pneu. lift, chip conveyor, roller jaw steadyrest, pwr. tailstock, S/N 50937, S/N 50939
• LODGE & SHIPLEY MDL. PROFITURN 40, G.E. 1050 CNC control, Fanuc Powermate sgl. axis CNC control for tooling use, outboard roller rest w/airlift, S/N 50940
• LODGE & SHIPLEY MDL. PROFITURN 40, G.E. 1050 CNC control, interchangeable turrets, outboard bar suppt w/air height adj., S/N 50979 k) 
• GANESH 44″ X 120″ MDL. GTD-44120CNC, new 4/2013, Fanuc 0iTD CNC control, 12 pos. vert. turning turret, 39-1/2″ dia. 4-jaw front chuck, 24-1/2″ dia. 4-jaw rear chuck, 12-1/2″ spdl. hole, spds: 7-350 RPM, in (4) gear ranges, 30 KW spdl. drive motor, pwr. travel tailstock, (2) roller jaw steadyrests, H.D. boring attach., elec. enclosure chiller, S/N 13074

HOLLOW SPINDLE LATHES

• LODGE & SHIPLEY MDL. POWERTURN 2XE-3220, 34-1/2″ sw. over carriage, 28″ sw. over crosslide, 20′ dist. btn. centers, 12-1/2″ dia. spdl. hole, front & rear 28″ dia. 4-jaw chucks, variable spdl. spds: 0-900 RPM, 50 HP DC variable spd. drive, roller jaw steadyrest, 4-way rapid traverse, S/N 50592
• KINGSTON MDL. OIL COUNTRY 30, 12-1/2″ spdl. hole, front & rear 24″ dia. 4-jaw chucks, 10′ dist. btn. centers, 30″ sw. over bed, 4-way rapid traverse, spds: 5-300 RPM, inch/metric thdng., S/N N.A.

CNC HOLLOW SPINDLE CHUCKER

• LODGE & SHIPLEY MDL. PROFITURN 40, Fanuc 0i CNC control, 14-3/4″ spdl. bore, 34-1/2″ sw. over bed & carriage wings, 20″ sw. over crosslide, 6 pos. horiz. boring turret, approx. 60″ Z-axis travel, S/N N.A.

ENGINE LATHE

• MORI SEIKI 24-1/2″ X 120″ MDL. MH3000, 3.5″ spdl. hole, spds: 27-1235 RPM, taper attach., (2) steadyrests, S/N 4358

VERTICAL MACHINING CENTERS

• BROWN & SHARPE MDL. SYSTEM 2000VC 4-AXIS, retrofitted w/Fanuc 18i-M CNC control, 30” x 81” table, CAT-50 spdl. taper, 40 pos. ATC, Troyke Mdl. 01-20-AB 4^th axis rotary table w/10-1/8″ dia. thru hole & Atlas 23-1/2″ dia. 4-jaw chuck, S/N 517-1-234
• BROWN & SHARPE MDL. SYSTEM 2000VC 4-AXIS, retrofitted w/Fanuc 0i CNC control, 30” x 81” table, Troyke NC30-A-360 CNC rotary table w/16″ spdl. hole, 32″ dia. 4-jaw chuck, 40 pos. ATC, CAT-50 spdl. taper, S/N 517-3-307
• (3) BROWN & SHARPE MDL. SYSTEM 2000VC 4-AXIS, G.E. 1050 CNC control, 30” x 81” table, 40 pos. ATC, CAT-50 spdl. taper, S/N 517-3-361 equipped w/ Troyke 20″ rotary table w/9-1/2″ thru hole, 24″ 4-jaw independent chuck, S/N 517-31-398 equipped w/ Troyke 20″ 4^th axis rotary table w/10.2″ hole, 24″ 4-jaw chuck, S/N 517-31-387 equipped w/ Troyke 20″ CNC rotary table w/10.2″ spdl. hole, 24″ dia. 4-jaw chuck,
• BROWN & SHARPE MDL. SYSTEM 1500VC, S/N 517-3-363 (parts use only)

SONIC BORING SYSTEM

•  (4) DEEP BORE INTERNAL TURNING BORING BARS w/independent servo feed for internal grooving inside drill collars

VERTICAL TURRET MILL

•  ALLIANT, 9″ x 42″ table, variable spds: 60-4500 RPM, long. pwr. feed, 2-axis D.R.O., S/N 9041442

TABLE TYPE HORIZONTAL BORING MILLS 

• GIDDINGS & LEWIS MDL. 350, 5″ main spdl., 2-1/2″ aux. spdl., main spdl. spds: 8.5-500 RPM, aux. spdl. spds: 34-2000 RPM, 2-axis D.R.O., 48″ x 74″ table, approx. 60″ cross, vert. & long. travels, outboard suppt., S/N 5946
• LUCAS 4″, Sony Magnascale D.R.O., push button motions, approx. 48″ vert. travel, 40″ x 74″ table, 60″ cross travel, approx. 84″ long. travel, S/N 4600206                                                                                               

HORIZONTAL BANDSAWS

• HEM MDL. H160A-DC, new 1996, 2″ blade size, 15 HP motor, variable blade spd., dbl. column design, auto. feed unit w/dual hyd. vises, 5′ H.D. output table, bundle clamp, Cutwatcher system, S/N 525296
• HEM MDL. 1200LAR, auto. index feed, S/N 67878

TRAVELLING COLUMN STRAIGHTENING PRESS

• DAKE APPROX. 150 T. CAP., 30″ dist. btn. columns, approx. 16′ column travel, 24″W. x 19′-7″L. bed, (2) roller & (2) stationary V block rests

HORIZONTAL HONING MACHINE

• BARNES MDL. 6, approx. 16′ max. stroke, 18″W. x approx. 16’L. fixture table w/ (2) roller chain rests & steadyrest, Barnes paper filter magnetic coolant system, 5 HP hone drive, (2) 16′ hone mandrels, wide array of honing heads up to 7-1/2″ dia., assorted hone tooling S/N 9028

ROTARY SCREW AIR COMPRESSOR

• FIAC MDL. AIR BLOCK 50, new 2006, 50 HP motor, w/Quincy refrigerated dryer, 240 gal. vert. air receiver, S/N BF923378                                                                     

AUTOMATIC TOOL DISPENSING CRIB

• AUTOCRIB MDL. VK500, (89) bins, 15-station aux. rotary carousal, S/N N.A.

MISCELLANEOUS MACHINES

• WOLDMANN & WEIGLTAP DISINTEGRATOR, roller base, S/N N.A.
• CUTTER MASTER CUTTER SHARPENING MACHINE, air bearing fixture, tilting spdl., S/N N.A.

PRECISION INSTRUMENTS

• (19) API THREAD & PLUG WORKING GAUGES and (18) RING GAUGES – most by PMC Lone Star from 2″ to 8-5/8″; SMALL DIA. THREAD PLUG GAUGES; END MEASURING RODS; GAUGE BLOCKS; STANDARD & BLADE TYPE MICROMETERS; AIR TRIMICROMETERS; FOWLER ELECTRONIC DIGITAL INTERNAL BORE INDICATORS; OVER (40) LARGE DIA. PRECISION RING GAUGES; VERNIER CALIPERS; 0 TO 12″ MICROMETER SETS

QUALITY CONTROL DEPARTMENT

• NIKON MDL. H16E-II HORIZONTAL BEAM COMPARATOR, 10X lens, surface reflection, S/N 0211/1108; TESA HITE MDL. 700 ELECTRONIC HEIGHT GAUGE, Item No. 007.30044, S/N 3L-306-02; PRECISION GRANITE SURFACE PLATE, 36″ x 48″ x 6″ thk., fabricated stand; L.K. MDL.LY90 CANTILEVER ARM LAYOUT COORDINATE MACHINE, new 2004, Renishaw PH10M probe head, (arm only – no table) S/N LY90/58890/04

PRECISION MACHINE ACCESSORIES

• LARGE DIA. LIVE CENTERS; V BLOCKS; BORING BLOCKS; ASSORTED 3-JAW & 4-JAW CHUCKS; TOOLPOST GRINDING ATTACHMENT; ALORIS QUICK CHANGE TOOLPOSTS & HOLDERS; MESSMA KELCH ROBOT TYPE KALIMAT 500-2M TOOL PRESETTER, new 1995, comparator head & #50 taper sleeve, S/N 650; (over 400) CAT-50 TAPER TOOLHOLDERS – most by Lindex, including collet style holders, endmill holders, extended length endmill holders, extended length collet holders & much more.

MISCELLANEOUS SHOP AND WAREHOUSE EQUIPMENT

• DRILLS; TAPS; REAMERS; ROUGHING & FINISHING ENDMILLS in 2-flute, 4-flute & 6-flute sizes; INDEXABLE TURNING TOOLS; INDEXABLE BORING BAR HEADS; CARBIDE INSERTS; HUGE ASSORTMENT OF H.D. INTERCHANGEABLE HEAD BORING BARS up to 3-1/2″; (2) 20″ DIA. POWER ROTARY TABLES w/10.2″ holes & DC variable drive; LUCAS 48″ MANUAL ROTARY TABLE; (2) MIST COLLECTORS

FORKLIFT

• HYSTER 15,000 LB. CAP. MDL. S150A, LPG pwrd., 15,000 lb. cap. @ 24″ L.C., 159.5″ max. lift, 48″ forks, large cushion tires, S/N A024D047008

ADJUSTABLE PORTABLE GANTRY CRANE

• ½ T. CAP. , adj. ht. under hook to approx. 12′, 16′ overall beam length

FREE STANDING PEDESTAL JIB CRANES

• (4) 2 T. CAP. X 14′ REACH, approx. 10′ ht. under hook
• (2) 2 T. CAP. X 14′ REACH, approx. 9′ ht. under hook
• 2 T. CAP. X 13′ REACH, approx. 8′ ht. under hook
• 1 T. CAP. X 16′ REACH, approx. 9′ ht. under hook
• 1 T. CAP. X 14′ REACH, approx. 10′ ht. under hook
• (2) 1 T. CAP. X 14′ REACH, approx. 9′ ht. under hook
• ½ T. CAP. X 13′ REACH, approx. 9′ ht. under hook
• ½ T. CAP. X 8′ REACH, approx. 6′ ht. under hook

MATERIAL HANDLING EQUIPMENT

• (5) ROLLER DRAWER TOOL CABINETS; SEVERAL FLAMMABLE STORAGE CABINETS; EXTENDABLE FORKLIFT BOOM; (4) GALBREATH 1 CU. YD. DUMPING HOPPERS; GALBREATH ½ CU. YD. SELF-DUMPING HOPPER on casters; HUOT TOOL CADDY CARTS w/casters for Galbreath ½ cu. yd. self-dumping hoppers; DIGITAL PLATFORM SCALE; TOLEDO VERTEX 60″ SQ. PLATEN w/I.Q. Plus 355 D.R.O. box; WIDE ASSORTMENT OF H.D. FABRICATED STEEL HORSES & SUPPORT STANDS; ELECTRIC CHAIN HOISTS; OIL STORAGE CARTS; TOOLHOLDER STANDS