TOSHIBA/SHIBAURA (RETROFIT 2009) BSF24/16 CNC FLOOR TYPE HORIZONTAL BORING MILL WITH HEIDENHAIN TNC 415 CNC CONTROL, 6.3″ SPINDLE DIAMETER, 9.45″ MILLING SPINDLE DIAMETER, 17.7″ X 19.7″ RAM CROSS SECTION, TRAVELS: X-468″ (COLUMN TRAVEL), Y-196.85″ (VERTICAL HEAD), Z-44.1″ (SPINDLE), 44.1″ (RAM), 88.2″ TOTAL TRAVEL OF RAM & SPINDLE, SPEEDS VARIABLE: 0 TO 800 RPM, CAT 50 TAPER, POWER DRAW BAR, CHIP CONVEYOR, 63 KW (85 HP) SPINDLE MOTOR

FARREL HEAVY DUTY VERTICAL BORING MILL WITH 2-RAMS, 243″ MAX SWING, 238″ HEIGHT UNDER TOOL HOLDER, 252″ MAX DISTANCE UNDER RAIL, 196″ TABLE DIAMETER, 96″ RAM TRAVEL, 35 DEG SWIVEL OF RAMS TOWARD CENTER, 45 DEG SWIVEL OF RAMS AWAY FROM CENTER, RAMS WILL FIT INTO A 20″ HOLE, TABLE SPEEDS: 5-35 RPM, FEED RATES: 0.005-1.5 IPR, 250,000 LB. TABLE LOAD CAPACITY, MIMIK 180-A HYDRAULIC TRACER ON RIGHT RAM, 100 HP TABLE MOTOR, RETROFIT WITH ALL NEW ELECTRICS IN 1997 BY MT RAVENSBURG, WITH ALLEN BRADLEY SLC500 PLC CONTROL, ALLEN BRADLEY 1395 DIGITAL DC DRIVES FOR EACH HEAD AND AN ALLEN BRADLEY 1395 DIGITAL DC DRIVE FOR THE TABLE

O-M LTD. TMD50/70 VERTICAL BORING MILL WITH 2-RAMS, 275.59″ MAX SWING, 133.5″ MAX UNDER TOOL HOLDER, 148″ MAX DISTANCE UNDER RAIL, 196.85″ TABLE DIAMETER, 70.9″ RIGHT RAM TRAVEL, 62.99″ LEFT RAM TRAVEL, 35 DEG SWIVEL OF RAMS, TABLE SPEEDS (16) .34 – 45 RPM, FEED RATES (16) .003 – .590 IPR, 132,000 LB. TABLE LOAD CAPACITY, MIMIK 180-A HYDRAULIC TRACER ON LEFT RAM, THREADING & ANGULAR TURNING, 100 KW (135 HP) TABLE MOTOR, 4-AXIS DRO

GIDDINGS & LEWIS HYPRO 54″ VERTICAL BORING MILL WITH 2-RAMS, 56.5″ MAX SWING, 54″ MAX DISTANCE UNDER RAIL, 50.5″ TABLE DIAMETER, 32″ RAM TRAVEL, < 45º SWIVEL OF RAMS, TABLE SPEEDS 3.1 – 44 RPM, FEED RATES: 0.003-0.500 IPR, 60 HP TABLE MOTOR, 4-AXIS ANILAM WIZARD 550 DRO

KAUKAUNA 140 U PORTABLE UNIVERSAL DRILLING, TAPPING AND BORING MACHINE WITH 82″ MAX CENTER SPINDLE TO COLUMN CENTER, 105″MAX BED TO HEAD, 23″COLUMN DIAMETER, 18″ MAX SPINDLE TRAVEL, #5 MT, 90º HEAD TILT UP AND DOWN, 360º HEAD ROTATION, SPINDLE SPEEDS TO 600 RPM, 20 HP

ESAB/PEMA 35000F 78500 LB. WELDING POSITIONER WITH 120″ DIAMETER TABLE, VARIABLE SPEED DRIVE

ARONSON GE500CS 50000 LBS WELDING POSITIONER WITH 84″ X 84″ T-SLOTTED TABLE, 130″ DIA. TOP PLATE, UPGRADED WITH SCR VARIABLE SPEED DRIVE, TILT & ROTATION, PENDANT CONTROL S/N 7998

PANDJIRIS 250MCRM1 25000 LBS WELDING POSITIONER WITH 72″ X 70″ TABLE, VARIABLE SPEED DRIVE, TILT & ROTATION, PENDANT CONTROL

PRATT & WHITNEY (RETROFIT 1997) VIKING 96 A30 CNC BED TYPE HORIZONTAL MACHINING CENTER WITH GE FANUC 16M CNC CONTROL, 96″ X 48″ TABLE, TRAVELS ; (HORIZONTAL TABLE TRAVEL) X- 90.75″, (VERTICAL TRAVEL OF HEAD) Y-48″, (HORIZONTAL HEAD TRAVEL IN AND OUT) Z-25.60″, CAT 50 TAPER, 15,000 LB. MAX TABLE LOAD, SPEEDS TO 3600 RPM

WORTHINGTON 400P 40000 LBS WELDING POSITIONER WITH 84″ X 84″ TABLE, VARIABLE SPEED DRIVE, TILT & ROTATION S/N 55677

CHICAGO 229PB POWER APRON BRAKE WITH 12′ X 3/4″ CAP, POWER CLAMP, HAND TOP ADJUSTMENT S/N 119491

6 WHEEL TRANSFER CARTS WITH 9’X17′ BED AND 54″ BETWEEN WHEELS

25′ 2 POINT LIFTING CHAIN WITH 93000 LB. LIFTING CAP.

AMERICAN 4′ RADIAL ARM DRILL

HUGE SELECTION OF 5’X5’X6″ ACORN TABLE