TRUMPF TRULASER MDL. 2030, new 2012, Siemens CNC control, 2,000 watt, 50″ x 120″ working area, auto. sheet loader w/sheet peeler and double-sheet detection, auto. unloader, auto. ht. regulation, dust collector, chiller unit, 5″ head, parallel to production option, S/N A0210A0398, new 10/2012, 8,438 beam on-time and 14,181 laser on-time.

TRUMPF TRULASER MDL. 2030, new 2008, Siemens CNC control, 2,000 watt, 50″ x 120″ working area, auto. sheet loader w/sheet peeler and double-sheet detection, auto. unloader, auto. ht. regulation, dust collector, chiller unit, 5″ head, parallel to production option, S/N A0210A0255, new 7/2008, 27,025 beam on-time and 48,678 laser on-time.

TRUMPF TRULASER MDL. 2030, new 2007, Siemens CNC control, 2,000 watt, 50″ x 120″ working area, auto. sheet loader w/sheet peeler and double-sheet detection, auto. unloader, auto. ht. regulation, dust collector, chiller unit, 5″ head, parallel to production option, S/N A0210A0169, new 8/2007, 59,533 laser on-time, unknown beam on-time.

TRUMPF TRUMATIC MDL. L2030, new 10/2005, res- onator replaced 2010, Siemens CNC control, 2,000 watt, 50″ x 120″ working area, auto. sheet loader w/sheet peeler and double- sheet detection, auto. un- loader, auto. ht. regulation, dust collector, chiller unit, 5″ head, parallel to produc- tion option, 11,252 beam on-time, 23,067 laser on- time, S/N A0210A0062.

TIMESAVER 36″ MDL. 1211-13-0 SANDER, 36″ belt width, Timesaver Mdl. WDC-5 wet style dust collector, S/N 30059, top sand operation, S/N 32099.

TIMESAVERS 24″ MDL. 1211-12-0 SANDER, Randbright wet style dust collec- tor, stainless steel cabinet, top sand operation, S/N 30529.

PARKER IONICS MDL. Q-FLO 6000 RECIRCULATING POWDER BOOTH (located in a 20′ x 28′ modular temp. controlled room w/York air conditioning system), new 2012, stainless steel construction, 36″ x 60″ opening, 6,000 FPM ventilation rate, 15 HP motor, (4) electro- static powder spray guns, mtd. to a reciprocator, GX- 7000M auto. gun system, powder hopper, Chill Thing powder bin, S/N 2012-10.

4′ X 18′ SPRAY-TO-WASTE POWDER TOUCH-UP BOOTH, modular galvanized panel construction, rear dust collection system.

GENERAL AUTO. TRANSFER 2-PASS GAS FIRED OVEN, installed 2012, 14’W. x 24’L., 36″W. x 60″ open- ing, air seal entry/exit, gas fired, recirculating, modular panel construction, digital controls, S/N 12032B.

RAPIDFLEX FREE STANDING OVERHEAD ENCLOSED TRACK CONVEYOR SYSTEM, approx. 10′ ht. under con- veyor, 16″ trolley spacing, Caterpillar drive unit, inline oiler, fabricated steel stands for entire conveyor length.

(3) GANDINNOVATIONS MDL. JETi-3150, 5′ x 10′ printing area, S/N JETi-3.15118, S/N JETi-3.15090, S/N N.A. (3rd machine is out of service).

INGERSOLL RAND MDL. UP6-50PE-125 ROTARY SCREW, 50 HP motor, 215 CFM, skid mtd., noise en- closure, air cooled, 24,000 run hours, S/N CBV125000.

INGERSOLL RAND MDL. SSRUP6-25-125 ROTARY SCREW, 25 HP motor, 102 CFM, 21,000 run hours, 80 gal. tank, tank mtd., S/N PX5637U05245.

INGERSOLL RAND MDL. NVC600A40N REFRIGERATED AIR DRYER, S/N 515167. (2) APPROX. 250 GAL. CAP. RECEIVING TANKS, vert. mtd., new 2005 and 2008.

TOYOTA MDL. 7FG0U30, 5,900-lb. cap. @ 24″ L.C., triple-stage see-through mast, 187″ max. lift, 48″ forks, dock lights, side shift, cushion tires, S/N 64532.

TOYOTA MDL. 7FGU30, LPG engine, 5,020-lb. cap. @ 24″ L.C., triple-stage see-through mast, 198.5″ max. lift, 48″ forks, dock lights, side shift, cushion tires, S/N 66817.

(2) U-LINE 2,200-LB. CAP. MDL. H1785 PALLET JACKS, 32″ lift ht.; (2) U-LINE 5,000-LB. CAP. MDL. H1043 PALLET JACKS; 5′ X 6′ ALUMINUM DOCK PLATE; STEPLADDER; ROLLING SAFETY LAD- DERS; (2) 48″ SQ. FORKLIFT SAFETY CAGES; 2-LEG HEAVY LIFTING CHAIN w/ center bale; ASSORTED STRAPPING EQUIPMENT; (30) INTERLAKE TEAR DROP STYLE PALLET RACKS, 16′ x 42″ uprights x 8′ cross beams; (3) 48″ ARMS X APPROX. 12′ TTL. HT. CANTILEVER MA- TERIAL STORAGE RACKS; PORTA-COOL 36″ MIST FAN; (2) LASER SLAT CLEAN- ING MACHINES, elec. pwrd., control pen- dant; (100’s) MOLDED PLASTIC BINS, sizes: 30″ x 24″ x 15″ dp., 21″ x 16″ x 12″ and 20″ x 12″ x 6″, most w/lids; 18″ X 24″ X 36″ HT. FLAMMABLE STORAGE CABINET; HAND TOOLS; MILLER MILLERMATIC MDL. 250 MIG WELDER, 250 amps @ 28 v. output, 60% duty cycle, S/N KC324539.