CNC FLOOR TYPE HORIZONTAL BORING MILL

• TOSHIBA/SHIBAURA (1976, rebuilt 1994 & retrofitted 2009) BSF24/16 CNC floor type horizontal boring mill with HEIDENHAIN TNC 415 CNC control, 6.3″ spindle diameter, 9.45″ milling spindle diameter, 17.7″ x 19.7″ ram cross section, travels: X-393″ (column travel), Y-196.85″ (vertical head), Z-44.1″ (spindle), 44.1″ (ram), 88.2″ total travel of ram & spindle, speeds variable: 0 to 800 RPM, CAT 50 taper, power draw bar, chip conveyor, (3) angle milling heads, universal milling head, facing head, additional 30′ bed section, (4) 118″‘ X 180″ X 12″ T slotted floor plates, 120″ X 177″ X 16″ T slotted floor plate, 63 KW (85 HP) spindle motor, s/n 37261(floor plates may be sold separately)
• FRORIEP 142″ X 142″ in-feeding power rotary table with 50 ton weight capacity

VERTICAL BORING MILLS

• FARREL Heavy Duty vertical boring mill with 2-rams, 243″ max swing, 238″ height under tool holder, 252″ max distance under rail, 196″ table diameter, 96″ ram travel, 35º swivel of rams toward center, 45º swivel of rams away from center, Table speeds:5-35 RPM, feed rates:0.005-1.5 IPR, 250,000 lb. table load capacity, MIMIK 180-A hydraulic tracer, 100 HP table motor, s/n 68R-5605 RETROFIT WITH ALL NEW ELECTRICS IN 1997 BY MTR RAVENSBURG, WITH ALLEN BRADLEY SLC500 PLC CONTROL, ALLEN BRADLEY 1395 DIGITAL DC DRIVES FOR EACH HEAD AND AN ALLEN BRADLEY 1395 DIGITAL DC DRIVE FOR THE TABLE
• O-M Ltd. TMD50/70 vertical boring mill with 2-rams, 275.59″ max swing, 133.5″ max under tool holder, 148″ max distance under rail, 196.85″ table diameter, 70.9″ right ram travel, 62.99″ left ram travel, ± 35º swivel of rams, table speeds (16) .34 – 45 RPM, feed rates (16) .003 – .590 IPR, 132,000 lb. table load capacity, MIMIK 180-A hydraulic tracer, threading & angular turning, 100 KW (135 HP) table motor, 4-axis DRO, s/n MN732406
• CINCINNATI HYPRO 120″ vertical boring mill with 2-rams, 127″ max swing, 97″ max under tool holder, 102″ max distance under rail, 121″ table diameter, 77″ ram travel, ± 60º swivel of rams, rams, table speeds variable: 0 – 21 RPM, 40,000 lb. table load capacity, 50 HP table motor, 6-axis NEWALL DP1200 DRO s/n 6983
• GIDDINGS & LEWIS HYPRO 54″ vertical boring mill with 2-rams, 56.5″ max swing, 54″ max distance under rail, 50.5″ table diameter, 32″ ram travel, ± 45º swivel of rams, table speeds 3.1 – 44 RPM, feed rates: 0.003-0.500 IPR, 60 HP table motor, 4-axis ANILAM WIZARD 550 DRO s/n 550-23-55
• WEBSTER & BENNETT DH 36″ vertical turret lathe with 5-position turret, 49.5″ max swing, 39.75″ max distance under rail, 36″ table diameter, 30″ ram travel, ± 45º swivel of ram, table speeds 5.6-125 RPM, feed rates: .005-.250 IPR, 30 HP table motor, 2-axis ANILAM WIZARD 550 DRO s/n 5368-8R-50600

VERTICAL TURNING, BORING & MILLING CENTER

• SCHIESS VERTIMASTER 32 DSC 280 CNC vertical turning, boring & milling center with SIEMENS SINUMERIK 840D is/828D CNC control Retrofit 2014, 126″ max swing, 98.42″ max under tool holder, 110.32″‘ table diameter, 63″ vertical ram travel, 78.87″ cross rail travel, ram hole clearance 14.2″, table speeds: 2-ranges 1.6-160 RPM, 71 KW (95 HP) table motor 55,000 lb. table load capacity, live spindle speeds: 2-ranges 50-4500 RPM, 22.5 KW (30 HP) live spindle motor, 32,000 lb. table load capacity, CAT 50 taper, 6-position tool head magazine, 20-station ATC, chip conveyor, s/n 11710690
• TOS SKS 20 CNC vertical turning, boring & milling center with SIEMENS SINUMERIK CNC control, (13) & (24) station ATC, 90.55″ turning diameter, 86.286″ max under tool holder, 78.74″ table diameter, 39.37″ vertical ram travel, 51.22″ cross rail travel, table speeds: 2.5-315 RPM, live spindle speeds: 4 to 3000 RPM, right angle head speeds 4 to 1200 RPM, 44,000 lb. table load capacity 84 HP table drive motor, 20 HP live spindle motor, CAT 50 taper, chip conveyor, right angle milling head (may be sold separately) s/n 1266

CNC TURNING CENTER

• MORI SEIKI (1996) SL75MC CNC turning center with MORI SEIKI MSC-516 CNC control, 35.8″ swing over bed, 22″ swing over saddle, 68.9″ between centers, 29.9″ max turning diameter, 69.2″ max turning length, 4.5″ spindle bore, (12) station turret with (6) live tool stations, spindle speeds to 1010 RPM, rotary tool speeds to 1500 RPM, 50/40 HP, 18″ chuck, tailstock, coolant & chip conveyor s/n 32
• WARNER & SWASEY SC¬25 4500 CNC turning center with SIEMENS 840 D CNC control, Retrofit approx. 2012, 6.25″ spindle bore, 28″ swing over ways, 21″ swing over cross slide, 84″ between centers, 5¬ position rear tool turret, 6 ¬position top tool turret, chip conveyor, 24″ chuck, 50 HP s/n 2590560

CNC LATHE

• LEBLOND TAPETURN 6640 CNC lathe, 70″ swing over bed, 44″ swing over carriage, 216″ between centers, 3.25″ bore, 18″ dia. tailstock quill, 60″ bed width, spindle speeds .8-300 RPPM, 50 ton weight capacity @ 100 RPM, chip conveyor, steady rest, GE MARK CENTURY 1050 controls, 75 HP, s/n TCRIWB513

LATHE

• NILES engine lathe with 167″ swing over bed, 161″ swing over cross slide, 442″ between centers, speeds to 12 RPM, 100,000 lb. max load between centers s/n 50546

BED TYPE CNC HORIZONTAL MACHINING CENTER

• PRATT & WHITNEY (retrofit 1997) VIKING 96 A30 CNC bed type horizontal machining center with GE FANUC 16M CNC control, 96″ x 48″ table, travels ; (horizontal table travel) X- 90.75″, (vertical travel of head) Y-48″, (horizontal head travel in and out) Z-25.60″, CAT 50 taper, 15,000 lb. max table load, speeds to 3600 RPM s/n 3091 0053

CNC VERTICAL MACHINING CENTER

• HAAS (1998) VF5 CNC vertical machining center with HAAS CNC control, 52″ X23″ table, travels: X – 50″, Y – 25″, Z – 25″, spindle speeds to 5000 RPM, CAT 50 taper, 20 ATC, 30 HP, programmable coolant, chip auger s/n 15977

TABLE TYPE HORIZONTAL BORING MILL

• GIDDINGS & LEWIS 350-T table type horizontal boring mill with 60″ x 98″ table, 79″ cross travel, 90″ longitudinal travel, 70″ vertical, 5″ spindle diameter, 35.50″ spindle travel, #6 MT, spindle speeds (36) 6.25-375 rpm, 15 HP, NEWALL 3 axis DRO, outboard support s/n 5884

DRILLS

• GIDDINGS & LEWIS 140 U CNC portable universal drilling, tapping and boring machine with ALLEN BRADLEY PANELVIEW 550 PLC control, 144″ max center spindle to column center, 114″ max bed to head, 23″ column diameter, 18″ max. spindle travel, #5 MT, 90o head tilt up and down, 360o head rotation, programmable depth, speeds, swivel and tilt, power rapid traverse & positioning control s/n 00348
• KAUKAUNA 140 U portable universal drilling, tapping and boring machine with 82″ max center spindle to column center, 105″ max bed to head, 23″ column diameter, 18″ max spindle travel, #5 MT, 90o head tilt up and down, 360o head rotation, spindle speeds to 600 RPM, 20 HP s/n 61
• KAUKAUNA 140 U portable universal drilling, tapping and boring machine with 103″ max center spindle to column center, 105″ max bed to head, 23″ column diameter, 18″ max spindle travel, #5 MT, 90o head tilt up and down, 360o head rotation, spindle speeds to 400 RPM, 10 HP s/n 274
• CARLTON 4A 8′ radial arm drill, with 19″ column, speeds to 1200 rpm, 8, 11.5, 14, 18 tapping leads, 19 ½” spindle travel, #6 MT s/n 4A4895
• CINCINNATI BICKFORD 7′ radial arm drill, with 17″ column, speeds to 1500 rpm, 8, 11.5, 14, 18, 20, 27 tapping leads, 18 ½” spindle travel, #6 MT s/n SE729
• AMERICAN 6′ radial arm drill, with 15″ column, speeds to 1600 rpm, 8, 11.5, 14, 18 tapping leads, 18″ spindle travel, #5 MT, (2) box tables s/n 77382165

ROTARY TABLES

• LUCAS 120 W 5′ X 3′ power rotary index table s/n 7493
• (2) INGERSOLL 120″ power rotary tables, with 50 ton load cap s/n n/a
• OHIO 99″ power rotary table s/n M683

MACHINE SHOP

• LAGUN FT-1 vertical milling machine with 10″ X 44″ table, speeds to 2440 RPM, power table feed, coolant s/n SE -866
• SOUTH BEND 14″ X 36″ tool room lathe with 1.25″ bore, threading s/n n/a
• SOUTH BEND 7″ X 14″ bench top lathe with 1 ¼ ” bore, threading s/n n/a
• LANDIS 2L 2″ lead screw threader with LANCO 16R2335 head s/n 2L866

GRINDERS

• BROWN & SHARPE #2 6″ X 18″ surface grinder
• CARBOLOY 270 dual head pedestal grinder
• GLENDO ACCU-FINISH bench type tool grinder s/n AF2841
• OLIVER drill point thinner s/n 1279
• OLIVER 2121 drill point grinder with 3/32″-1/2″ cap s/n B-3053
• OLIVER 600 drill grinder with 1/2″- 3″ cap s/n G-6897

CNC SHAPE CUTTING MACHINE

• ALLTRA (2011) PG30-20S gantry type CNC shape cutting machine, BURNY10 LCD PLUS CNC control, 20′ effective cutting width, 70′ overall rail length, HYPERTHERM HPR400XD HYPERFORMANCE plasma system with “Tru-Hole” Cutting Technology, (1) programmable plasma bevel station, (3) oxyfuel straight cutting heads, (4) head oxeyfuel torch bevel station, 44.5′ X 21.3′ water table, 12″ max plate thickness with oxyfuel, s/n 5974

WELDING POSITIONERS

• ESAB/PEMA 35000F 78500 lb. welding positioner with 120″ diameter table, variable speed drive .005-.4 RPM’s, hydraulic tilt & rotation, pendant control, s/n A1960
• ARONSON GE500CS 50000 lbs welding positioner with 84″ x 84″ t-slotted table, 130″ dia. top plate, upgraded with SCR variable speed drive, tilt & rotation, pendant control, s/n 7998
• PANDJIRIS 250MCRM1 25000 lbs welding positioner with 72″ X 70″ table, variable speed drive, tilt & rotation, pendant control, s/n 25-1253
• WORTHINGTON 400P 40000 lbs welding positioner with 84″ X 84″ table, variable speed drive, tilt & rotation s/n 55677
• WORTHINGTON 160P 16000 lbs welding positioner with 72″ dia. table, variable speed drive, tilt & rotation s/n 66771
• PANDJIRIS 45-R 4500 lbs welding positioner with 48″ X 48″ table, variable speed drive, tilt & rotation’ pendant control, s/n 2006802-3
• ARONSON HD60A 6000 lbs welding positioner with 48″ X 48″ table, variable speed drive, tilt & rotation, pendant control, s/n 83606

WELDING MANIPULATORS

• GOURAN welding manipulator with 21′ horizontal travel, 12′ vertical travel, LINCOLN IDEALARC 1000 welder, LINCOLN NA-5 automatic wire feeder w/ submerged arc welding head & flux hopper, PANDJIRIS precision ball bushed slides, INVINCIBLE dust collector
• PANDJIRIS D68-20′ X 14′ welding manipulator, 20’4″ boom length, 14′ horizontal boom stroke, 20′ 9″ vertical stroke, 24’5.75″ maximum vertical reach, Car mounted on king pin rotating base, car speed 3 -125 IPM, horizontal boom speed 3 – 124 IPM, hoist speed 48 IPM, vertical slide speed 14 IPM, column rotation speed .115 IPM, horizontal slide speed 5 IPM, dual wire feed, (2) Lincoln AC/DC 1000 SD weld units, catwalk on boom, complete with weld controls, wire feeder and controls for submerged arc welding.

BENDING ROLLS

• BERTSCH #20 initial pinch bending rolls, 14′ X 1-3/8″ capacity, 22-1/2″ top roll diameter, 60 HP main motor, 30 HP rear roll adjustment motor, (2) 2 HP front roll wedge motors, air drop end, power roll adjustment, “tri-speed” control upgrade with joystick controller, s/n 8239
• WEBB R3L initial pinch bending rolls with 10 X 10ga max cap., air drop end s/n 5236
• STE-CO IP 2 4′ X 3/16″ initial pinch bending rolls s/n L344310

FABRICATING EQUIPMENT

• CHICAGO 229PB power apron brake with 12′ X ¾” cap, power clamp, hand top adjustment, s/n 119491
• SMT PULLMAX (1980) KPD450 51/437+600HV 500 ton hydraulic press brake with 224″ bed including 24″ horn on RH side, 172″ between housings, 18 ¾” throat, 12″ stroke s/n 2813
• SMT PULLMAX (1981) GSA 740 13 ½’ X ½” hydraulic shear with 10′ squaring arm, power rake adj, power gap adj, 17″ throat, 60″ front operated power back gauge s/n 2987
• KINGSLAND (1991) 125P625 125 ton hydraulic punch with 24″ throat, 2″ stroke, max hole dia 2.25″ thru .63″ s/n 636894

TANK TURNING ROLLS

• KOIKE ARONSON (2012) 8TRR 30000 lbs. cap tank turning rolls driver & idler with 20″ dia. X 6 ½” face rubber wheels s/n 47767
• ARONSON (est)10000 lbs cap tank turning rolls driver & idler with 18″ dia. X 4″ face rubber wheels
• PANDJIRIS (est) 20 ton cap tank turning rolls driver & idler with (5) 20″ dia. X 5″ face rubber wheels
• WEBB (est) 30 ton cap tank turning rolls driver & idler with (3) 18″ dia. X 6 1/2″ face rubber wheels
• TELEDYNE READCO (1996) (est) 5000 lbs tank turning rolls

SAWS

• DOALL TF-2025 tilt frame vertical band saw with 25″ X 20″ cutting cap, ,± 60º tilt, 200″ X 11/4 ” blade, coolant, power roller conveyors s/n 543-12129R
• METALMIZER MS2018 2 tilt frame vertical band saw with 18″ X 20″ cutting cap, ,± 45º tilt, 29″ X 28″ table, 14’6″ X 1″ X .035″ blade s/n M50394277

TRACK CUTTERS

• L-TEC CM-72 oxy-fuel track cutter s/n 12-21679
• (3) L-TEC CM-79 oxy-fuel track cutter s/n X88L-19162, X87L-17925, X92L-22951
• (4) LINDE CM-45 oxy-fuel track cutter s/n 722-6, 22V1, 2U6, n/a
• GULLCO KAT oxy-fuel track cutter s/n n/a
• KOIKE SANSO KOGYO IK-12 MAX 3 oxy-fuel track cutter s/n J89777

MOBILE CRANE

• GROVE IND-1012 material handling hydraulic crane with 14-30′ full power telescoping boom, 270º rotation, 10000 lbs max hoist cap, (4) hydraulic cantilever outriggers, diesel engine s/n 42022

PLATFORM LIFTS

• JLG (2008) 3246 electric scissor lift with 700 lbs cap, 44″ x 98.5″ platform, 31 ¾’ vertical lift, built in charger s/n 0200185895
• JLG (2007) 2030ES electric scissor lift with 800 lbs cap, 30″ x 90″ platform, 20′ vertical lift, built in charger s/n 0200156776
• JLG 1932E3 electric scissor lift with 500 lbs cap, 30″ x 72″ platform, 18′-9″ vertical lift, built in charger s/n n/a
• JLG CM1732 electric scissor lift with 500 lbs cap, 30″ x 64″ platform, 18′-9″ vertical lift, built in charger s/n n/a
• (2) SIMON L2034E electric aerial lift with 750 lbs cap, gated platform, 20 1/2′ vertical lift, built in charger s/n EDB01769, EDB09850
• MAYVILLE electric scissor lift with 500 lbs cap, built in charger s/n 4800404

WOODWORKING

• HITACHI C12RSH 12″ sliding dual compound mitre saw
• SHENG TSAI KL-W569 14″ vertical band saw s/n 85921
• MASTER 12 ½” disk sander with dust collector
• POWERMATIC 225 24″ planer with dust collector s/n 024R006
• CRESCENT 12 planer s/n n/a
• TANNEWITZ GH 36″ vertical band saw s/n T3237
• OLIVER 299-D 24″ planer with dust collector s/n 60607
• NORTHFIELD UNI-POINT 36 AF 16″ radial arm saw with miter cutting, conveyors s/n 72103-D
• MILLWAKEE 6410 panel saw s/n 771A499038
• BLOUNT 20″ X 96″ wood lathe
• TANNEWITZ I 10″ vertical band saw s/n 73236
• MASTER SP2SP spindle sander s/n 866

WELDERS

• (8) MILLER DIMENSION 652 portable MIG welders with, cart, boom, (2) wire feeds & guns
• (2) MILLER DELTAWED 652 portable MIG welders with, cart, boom, (2) wire feeds & guns
• (2) MILLER DELTAWED 652 MIG welders with, boom, (2) wire feeds & guns
• (2) MILLER DELTAWED 652 MIG welders with, boom, wire feeds & guns
• MILLER DIMENSIOM 1000 MIG welder with wire feed & gun
• MILLER DELTAWED 650 MIG welder with wire feed & gun
• (2) MILLER DIMENSIOM 652 MIG welders with wire feeds & guns
• (3) MILLER DELTAWED 652 MIG welders with wire feeds & guns
• MILLER MAXTRON 450 MIG welder with wire feed & gun
• MILLER DELTAWED 451MIG welder with wire feed & gun
• MILLER DIMENSIOM 452 MIG welder with wire feed & gun
• MILLER GOLDSTAR 452 MIG welder with wire feed & gun
• MILLER PULSTAR 450 MIG welder with wire feed & gun
• (2) MILLER MILLERMATIC 251 MIG welders with cables & gun
• (2) MILLER MILLERMATIC 251 MIG welders with cables & gun
• MILLER LE 200 MIG welder with wire feed & gun
• MILLER GOLDSTAR MIG welder with wire feed & gun
• MILLER MP65E MIG welder with wire feed & gun
• HOBART CYBERTIG TIG welder with cables & gun
• MILLER SYNCROWAVE 351 TIG welder with cables & gun
• MILLER SYNCROWAVE 250 TIG welder with cables & gun
• (2) NELSON NELWELD 5000 stud welders
• NELSON NELWELD 6000 stud welder
• NELSON TR 850 stud welder
• MILLER CP/CC 1500 welder
• (2) LINCOLN POWERWAVE 1000 welders
• LINCOLN IDEALARC DC 1000 welder
• (2) MILLER DIMENSIOM 652 welders
• (2) LINCOLN IDEALARC TM 500 welder
• MILLER DIMENSION 400 welder
• MILLER SRH 444 welder
• MILLER DIALARC 250 welder
• HYPERTHERM POWERMAX 1100 plasma cutter

MISC SHOP EQUIPMENT

• AXIOM (2005) 150 portable shot blast s/n 24L1359
• NEW YORK BLOWER 272 dust collector s/n P-7632
• TENNANT S20 indoor or outdoor ride-on electric sweeper s/n G386838
• INSTAPAK FOAM-IN-PLACE packaging system
• AUTOQUIP 2500 lbs hydraulic lift table s/n 1554827
• TORRIT 14 1/2′ X 7′ X 6 1/2′ H spray booth
• GRACO PROMIX 2KE plural component proportioner s/n A0105
• (3) GRACO paint pumps
• TEEL ¾ HP tank mounted rotary air compressor s/n 3P716C
• WILTON VSG 2015 pedestal drill with 15″ throat, speeds to 1200 RPM s/n 152161
• ALLEGANY 1020 100000 lbs digital crane scale s/n 33800
• (3) DRYROD 16 rod ovens
• UNI-TEK 325 tap disintegrator s/n 081698
• RIDGID 1224 6″ pipe threader with stand s/n EB07944
• GRACO REACTOR 2 H-XP2 3500 PSI hydraulic plural component hydraulic proportioner to apply polyurethane, polyurethane hybrids and polyurea coatings that require accurate temperatures and pressures
• INGERSOLL-RAND TWPE1 hydraulic wrench torque system s/n OF7-0121
• POWERLIFT 4500 lbs hydraulic lift

ALSO:
Approx (75) 5′ X 5′ X 5 ¾ ” ACORN plates, lifting accessories, pneumatic tools, pneumatic hose, hand tools, welding accessories, gauges, torches, tool carts, tool cabinets, work benches, measuring instruments, angle plates, floor plates, steel work tables, fly cutters, carts, dollies, machine accessories, tool holders, shop fans, ladders, power tools, granite surface plates, vacuums, strapping caddies, pump trucks, dumping hoppers, parts cleaners, drills, reamers, threading equipment, hydraulic jacks, adjustable pallet racking, cantilever racking, yard trailers, and much more.