CNC VERTICAL MACHINING CENTERS:
- 2006 MANFORD VH1000 CNC Vertical Machining Center, Travels: X-39.4”, Y-20”, Z-22”, Table Size 47.2” x 19.2”, 1100 lb. work weight, CAT 40 taper, 8000 RPM, 21-ATC, Fanuc Oi-MC CNC control, S/N: 06058 (2006)
- LEADWELL MCV-1300ER 4-Axis Vertical Machining Center, Table Size 27.25”” x 66.5”, CAT 50 taper, 30 ATC, chip conveyor, Fanuc O-M CNC control, S/N: L1S1H0198
- BRIDGEPORT VMC760-22 Vertical Machining Center, 39.25” x 19.25” table, 22 ATC, BT-40 taper, Bridgeport DX-32 control, S/N: 760-031
CNC ROTARY TABLES:
- 9” TROYKE NC-9-B 4th Axis Rotary Table, S/N: 4349-1
- 6” TROYKE DL-6-B 4th Axis Rotary Table, S/N: 5155-5
CNC LATHES:
- JOHNFORD TC-20 CNC Lathe, 16.54” swing over bed, 11.81” swing over cross slide, 20.47” distance between centers, 2.6” spindle bore, A2-6 spindle nose, 25-4000 RPM, 12-position turret, 6.69” x-axis, 15.75” z-axis, chip conveyor, 8” 3-jaw chuck, tailstock, Fanuc O-T control, S/N: T17189 (1997), with CNC ENHANCEMENTS Autobar 400 Magazine Type Bar Feed, pendant, S/N: 121 (1997)
- IKEGAI AX15Z CNC Lathe, with 8” diameter 3-jaw chuck, 12-position turret, tailstock, Fanuc control
LATHES – 2ND OPERATION & SPEED TYPES
- FEELER FSL-27 High Speed Lathe, with draw bar, production cross slide, 5C collet capacity, 8.5” swing over way, ½ HP, S/N: 10225
- MSC LHT-25B 2nd Operation Turret Lathe, 2HP, with draw bar, 6.5” swing over cross slide, [4] spindle speeds, 460-1850 RPM, coolant, S/N: 258187 (1989)
VERTICAL MILL:
- BRIDGEPORT / SUPERMAX 1 HP Vertical Mill, with MITUTOYO digital readout, [8] spindle speeds, 80-2720 RPM, R8 collet, 9” x 49” power feed table, S/N: 911941
SAWS:
- 20” ROCKWELL 28-3X5 Vertical Bandsaw, vari-speed, with 50-4500 FPM, with 24.25” x 24.25” tilting table, S/N: 181436
- 8” x 16” KALAMAZOO Horizontal Bandsaw, with manual clamp, 1” blade
AIR COMPRESSORS & DRYERS:
- 10HP Vertical Piston Type Tank Mounted Air Compressor
- QUINCY Twin 2HP Horizontal Tank Mounted Air Compressor, [2] piston type compressors with 2HP motors
- 5HP (approximately) DEVILBLISS Piston Type Horizontal Tank Mounted Air Compressor
- DAYTON Mdl. 3Z531 1/3HP Air Dryer, with 35 SCFM @ 100 psig, S/N: 0316A-31-8612-161N
MISCELLANEOUS MACHINERY:
- 5” x 10” UNITEK Handfeed Surface Grinder, direct drive spindle, Walker 5” x 10” permanently magnetic chuck
- 14” CLAUSING 4-spindle Gang Drill, with #1655 step pulley head, #1639 step pully with 260-5400 RPM, (2) #1685 variable speed heads, 330-4000 RPM, 20” x 60” table
- 15” WALKER-TURNER Floor Type Drill Press, 1/2HP, single phase
- 10” KIRA KRT-10 Bench-Type Drill Press, 4 spindle speeds, 480-1050 RPM, S/N: AU1507
- Vibratory Finisher, 20” long x 11” wide x 6” inside dimensions, rubber lined
- CYCLONE 2-hand Reach-in Dry Blast Cabinet, 26” x 22” x 21” deep approx. inside dimensions
- AIR ROVER XL24 Portable Air Condition Unit, 27,400 BTUH, S/N: 23280501
- GREENERD Bench-type Arbor Press
- 6” Belt & 12” Disc Combination Sander, 3-phase, tilting table
- 1/3 HP US Electrical Tool Double End Pedestal Grinder, 6” diameter wheels, single phase
- AIRCO Mdl. 2.25ADT-2-A Welder, 200 amps, 30 volts, S/N: 1353-0141
MISCELLANEOUS SHOP & TOOLROOM ITEMS:
- 6” & 8” KURT Vises, Right Angle Plate, Taps, Drill Bits, Stamp Sets, Milling & Bench Vises, Drill Cabinets, Tapping Heads, #40 & #50 Taper Tooling, ANGLOK Vises, HOUT Tool Carts, 5C Collets, R8 Collets, Indexers, Rolling Carts, Work Benches, Plus Much More
INSPECTION ITEMS INCLUDING:
- MITUTOYO 18” Digital Height Gage, Assorted Height Gages, Micrometer Sets, Pin Gauge Sets, Dial Gauge, MITUTOYO Height Master, Verniers up to 50”, plus gages, Jo-Blocks, Calipers, 48” x 36” x 6” Granite Surface Plate, Etc
- 14” SCHERR-TUMICO Optical Comparator, 6” x 16” Work Table