CNC HORIZONTAL MACHINING CENTERS

• [2] Makino A61NX CNC Horizontal Machining Centers, with Makino Pro 5 controls, travels: x-28.74”, y-25.6”, z-28.7”, 14,000-RPM spindle speeds, [2] 19.68” x 19.68” pallets, 1˚ indexing, 1100# capacity work load, CAT #40 taper, 60-position automatic tool changer, coolant system, S/N’s: 10 (New 2011); 15 (New 2007)
• Makino A51 CNC Horizontal Machining Center, with Makino Pro 3 controls, travels: x-22”, y-22”, z-23.6”, z-28.7”, 12,000-RPM spindle speeds, [2] 15.75” x 15.75” pallets, 1˚ indexing, 880# capacity work load, CAT #40 taper, 60-position automatic tool changer, coolant system, S/N: 531 (New 2005)
• [2] Makino A71 CNC Horizontal Machining Centers, with Pro 5 controls, travels: x-28.74”, y-25.6”, z-28.7”, 10,000-RPM spindle speeds, [2] 19.68” x 19.68” pallets, 1˚ indexing, 1540# capacity work load, CAT #50 taper, 134-position automatic tool changer, coolant system, S/N’s: 300 (New 2005); 113 (New 2004)
• [2] Makino A81 CNC Horizontal Machining Centers, with Pro 3 controls, travels: x-34.4”, y-31.5”, z-401.”, 10,000-RPM spindle speeds, [2] 24.8” x 24.8” pallets, 1˚ indexing, 2650# capacity work load, CAT #50 taper, 60-position automatic tool changer, coolant system, S/N’s: 112 (New 2004); 113 (New 2004)
• [2] Mori Seiki NHX4000 CNC Horizontal Machining Centers, with M730BM controls, travels: x-22”, y-22”, z-26”, 12,000-RPM spindle speeds, [2] 15.7” x 15.7” pallets, 1˚ indexing, work load, CAT #40 taper, 40-position automatic tool changer, chip blaster coolant system, chip conveyor, S/N’s: NHX40111108 (New 2011); NHX40111110 (New 2011)
• Mori Seiki NH5000/40 CNC Twin Pallet Horizontal Machining Center, with [2] 20” pallets, 40-taper, Fanuc 18M controls, 1˚ indexing, 60-position automatic tool changer, high pressure coolant, through spindle coolant system, chip conveyor, S/N: NH501CB-0260 (2003)
• Mori Seiki NH4000DCG CNC Horizontal Machining Center, with MSX70III controls, travels: x-22”, y-22”, z-24.8”, 14,000-RPM spindle speeds, [2] 15.75” x 15.75” pallets, 60-position automatic tool changer, chip blaster coolant system, chip conveyor, mist collector, S/N: NH401GB1629 (New 2007)
• OKK HM-80S CNC Horizontal Machining Center, with Fanuc 16I-M controls, travels: x-39.37”, y-33.46”, z-32.28”, 8,000-RPM spindle speeds, [2] 31.5” x 31.5” pallets, .001˚ indexing, 1100# capacity work load, CAT #50 taper, 60-position automatic tool changer, S/N: 158 (New 1999)
• OKK HM-80S CNC Horizontal Machining Center, with Fanuc 16I-M controls, travels: x-39.37”, y-33.46”, z-32.28”, 8,000-RPM spindle speeds, [2] 31.5” x 31.5” pallets, .001˚ indexing, 1100# capacity work load, CAT #50 taper, 120-position automatic tool changer, S/N: 121 (New 1999)
• Toyoda FA1050 Twin Pallet CNC Horizontal Machining Center, with 6,000-RPM spindle speeds, 3-axis, travels: x-59.1”, y-55.1”, z-45.2”, Renishaw RMP600 AMS probe system, 60-position automatic tool changer, Fanuc controls, 41” x 41” pallets, S/N: NM9399 (New 2001)
• [3] Mori Seiki SH-500 CNC Twin Pallet Horizontal Machining Centers, with MSC-516 controls, travels: x-24.8”, y-23.6”, z-25.6”, 12,000-RPM spindle speeds, [2] 19.7” x 19.7” pallets, 1˚ indexing, 1100# capacity work load, CAT #40 taper, 40-position automatic tool changer, coolant system, S/N’s: 722 (2003); 663 (New 1998); N/A (New 1998)
• [3] Mori Seiki SH-633 CNC Horizontal Machining Centers, with Fanuc 18-MA controls, travels: x-33.1”, y-29.9”, z-33.1”, 15,000-RPM spindle speeds, [2] 24.8” x 24.8” pallets, 1˚ indexing, 2640# capacity work load, CAT #50 taper, 60-position automatic tool changer, Cooljet 70-30 coolant system, S/N’s: 585 (New 2000); 575 (New 2000); 578 (New 1998)
• [2] Mori Seiki SH-630 CNC Horizontal Machining Centers, with MSC-516 controls, travels: x-39.37”, y-33.46”, z-32.22”, 6,000-RPM spindle speeds, [2] 24.8” x 24.8” pallets, 1˚ indexing, 3300# capacity work load, CAT #50 taper, 60-position automatic tool changer, coolant system, S/N: 440 (New 1999); 237 (New 1998)
• [2] Mori Seiki SH-403 CNC Horizontal Machining Centers, with MSG501 controls, travels: x-22”, y-20”, z-20”, 12,000-RPM spindle speeds, [2] 15.75” x 15.75” pallets, 1˚ indexing, 1100# capacity work load, CAT #40 taper, 60-position automatic tool changer, chip blaster coolant system, chip conveyor, through spindle coolant, S/N’s: 1072 (New 2000); 1106 (New 2000)
• Mori Seiki SH-400 CNC Horizontal Machining Center, with Fanuc 18-MA controls, travels: x-22”, y-20”, z-20”, 12,000-RPM spindle speeds, [2] 15.75” x 15.75” pallets, 1˚ indexing, 1100# capacity work load, CAT #40 taper, 60-position automatic tool changer, coolant system, S/N: 361 (New 1998)
• Mori Seiki SV-5038/50 CNC Horizontal Machining Center, with Fanuc 18I-MA controls, travels: x-40.2”, y-20.1”, z-20.1”, 6,000-RPM spindle speeds, [2] 43.3” x 23.6” pallets, pallet changer, 2640# capacity work load, CAT #40 taper, 30-position automatic tool changer, chip blaster coolant system, S/N: 2356 (2000)

CNC VERTICAL TURNING CENTERS

• [2] Doosan Puma V550-2PS Twin Spindle CNC Vertical Turning Centers, with Fanuc 18 controls, travels: x-15.35”, z-30.7”, 28.74” max diameter, 2,000-RPM spindle speeds, [2] 24” chucks, [2] 10-position turrets, coolant system, dual chip conveyors, S/N’s: 2V150135 (2008); 2V150124 (2006)
• Hwacheon VT-550-2SP Twin Spindle CNC Vertical Turret Lathe, with Fanuc 18I controls, travels: x-24”, z-37”, 43.5” max turning diameter, 1,500-RPM spindle speeds, [2] 24” chucks, 10-position turret, coolant system, Jorgenson dual chip conveyor, S/N: M088354C4G-C (2006)

CNC VERTICAL MACHINING CENTERS

• [2] Haas VF3SSYT CNC Vertical Machining Centers, with TR160-2 CNC trunnion-style rotary table, Haas high speed CNC control, travels: x-40”, y-26”, z-25”, 12,000-RPM spindle speeds, 24-position automatic tool changer, 40-taper spindle, 30HP spindle drive, rigid tapping, [2] 6” t-slotted chucks, trunnion table, S/N’s: 1103912 (New 2013); 1103934 (New 2013)
• Haas VF-3SSAPC CNC Vertical Machining Center, with Haas controls, travels: x-40”, y-20”, z-25”, 12,000-RPM spindle speeds, 18” x 40” table size, 3000# capacity work load, BT #40 taper, side mounted 40-position automatic tool changer, coolant system, pallet changer, S/N: 1060773 (New 2007)
• Haas VF540XT CNC Vertical Machining Center, with Haas high speed CNC control, 40-position automatic tool changer, 40-taper spindle, 30HP main spindle, S/N: 26092 (New 2001)
• Haas VF-2 CNC Vertical Machining Center, with Haas controls, travels: x-30”, y-16”, z-20”, 7,500-RPM spindle speeds, 10” x 36” table size, 3000# capacity work load, BT #40 taper, 20-position automatic tool changer, coolant system, S/N: 6724 (New 1995)
• OKK MCV-1060 CNC Vertical Machining Center, with Neomatic 635 controls, travels: x-84”, y-41”, z-31”, 6,000-RPM spindle speeds, 41” x 98” table size, 880# capacity work load, 40-position automatic tool changer, coolant system, Midaco Series 80SD pallet changer, S/N: 128 (New 1998)
• [2] Mori Seiki SV-503B/50 CNC Vertical Machining Centers, with MSG-501 controls, travels: x-40.2”, y-20.1”, z-20.1”, 6,000-RPM spindle speeds, [2] 43.3” x 23.6” table size, pallet changer, 2640# capacity work load, 30-position automatic tool changer, dual turbo magnetic chip conveyor, S/N’s: 2357 (New 2000); 2399 (2000)
• Mazak VQC 20/40B Bridge Type CNC Vertical Machining Center, with Mazatrol CAM-M2 controls, travels: x-39.4”, y-20”, z-18”, 6,000-RPM spindle speeds, 21.6” x 48.8” table size, 1764# capacity work load, CAT #40 taper, 30-position automatic tool changer, through spindle coolant system, S/N: 67649 (New 1987)
• Kitamura MyCenter 3Xi CNC Vertical Machining Center, with Fanuc Series 16i-M controls, 10,000-RPM spindle speeds, 80mm max diameter of tools, 30-position automatic tool changer, S/N: 12190
• Matsuura ES-800V PC2 CNC Vertical Machining Center, with Matsuura G-Tech 840DI controls, pallet changer, 40-position automatic tool changer, chip conveyor, S/N: 17279 (2007)
• Matsuura MC-600-DC CNC Twin Spindle Vertical Machining Center, with Yasnac 180-MB controls, travels: x-24”, y-16”, z-19”, 12,000-RPM spindle speeds, 16” x 35” table size, 660# capacity work load, 30-position automatic tool changer, coolant system, S/N: 980113217 (New 1998)
• Matsuura MC-510VF CNC Vertical Machining Center, with Yasnac 180-MB controls, travels: x-20”, y-14”, z-18”, 8,000-RPM spindle speeds, 15” x 30” table size, 880# capacity work load, 20-position automatic tool changer, coolant system, S/N: 930710554 (New 1995)

CNC SCREW MACHINES

• [3] Star SV-32JII CNC Screw Machines, with Fanuc Series 18i-T controls, IEMCA Boss 432/37 bar feed, parts catcher, S/N’s: 0242; 0235; 0245S
• [2] Schutte SG-18 CNC 6-Spindle Screw Machines, with Series 5 No. 2 Siemens Simatic OP27 controls, Aercology mist collector, Iemca Type SIR 2SP magazine type bar feed (S/N’s: 9802024; 98022307), S/N’s: PE-SG18-0502 (1998); PE-SG18-0410 (1997)

CNC LATHES

• Hardinge Conquest T-65L CNC Turning Center, with Fanuc 18T controls, travels: x-13”, z-10.4”, 10.5” max turning diameter, 40” max turning length, 3,250-RPM spindle speeds, 10” chuck, 12-position turret, coolant system, chip conveyor, programmable tailstock, S/N: CL829-B65 (1998)
• [2] Southwestern TRAK TRL1745P 17” x 45” CNC Flatbed CNC Lathes, with Proto Trak LX2 control, 9” turning diameter, 2” bar capacity, 40-2200 RPM spindle speeds, 7.5HP spindle, 12” 3-jaw chuck, coolant system, S/N’s: 32944 (1994); 29230

COORDINATE MEASURING MACHINES

• [2] Brown & Sharpe 12-20-10-SP Coordinate Measuring Machines, with 112” x 63” granite table, travels: x-47.2”, y-78.7”, z-39.4”, Renishaw PH10MQ touch probe with control, joystick control, PC, 2014 software, S/N’s: 0199-2500 (New 1999); 0599-2520 (New 1999)
• Brown & Sharpe XCEL 9-15-9 DCC Coordinate Measuring Machine, with 51” x 86” granite table, Renishaw PH-10MQ touch probe with control, joystick control, travels: x-60”, y-35”, z-35” microprocessor & printer, 2014 software, S/N: 0300-2417
• Brown & Sharpe Global Image Coordinate Measuring Machine, with 97” x 55” granite table, PC, 2014 software, S/N: 1200-6401 (New 2000)
• Brown & Sharpe MICRO-XCEL 7-10-5 PFX Coordinate Measuring Machine, with 33” x 53” granite table, microprocessor & printer, PH10M probe, 2014 software, S/N: 0698-3929 (New 1998)
• Brown & Sharpe MICRO-XCEL PFX-4-5-4 Coordinate Measuring Machine, with travels: x-18”, y-20”, z-16”, 22” x 30” granite table, PC, printer, Renishaw PH10T probe, S/N: 0500-1869 (New 2000)
• Sheffield Cordax 1808-M Coordinate Measuring Machine, with 27” x 64” granite table, 3-axis digital readout, microprocessor & printer, S/N: C-5237

SURFACE GRINDERS

• Okamoto ACC-2860EX CNC Surface Grinder, with Okamoto precision control, 28” x 60” electric chuck, coolant system, magnetic separator, S/N: 37173 (1999)
• Chevalier FSG-618M 6” x 18” Hand Feed Surface Grinder, with 6” x 18” permanent magnetic chuck, S/N: A3884020
• Chevalier FSG-618SP 6” x 18” Hand Feed Surface Grinder, with permanent magnetic chuck, fine feed, S/N: A4947005
• Chevalier ACCUGRIND 612SP 6” x 12” Hand Feed Surface Grinder, with permanent chuck, Newall 2-axis digital readout, S/N: A587C002
• Brown & Sharpe 818 Techmaster Grinder, with 8” x 18” magnetic chuck & rectifier, S/N: 523-1818-1647
• Boyar Schultz 6” x 12” Hand Feed Surface Grinder, S/N: N/A

OD GRIDNERS

• Jones & Shipman 1300 10” x 27” OD Grinder Unit, with ID spindle, S/N: N/A

CNC EDM DRILL

• Sodick K1C Small Hole Drilling CNC EDM, with X-ACT SDS2 control, S/N: 1769 (2010)

LATHES

• LeBlond Regal 24” x 60” Engine Lathe, with 20” 3-jaw chuck, 2-axis digital readout, 5” hole, steady rest, taper spindle, threading attachment, S/N: 6HS231
• PHL-1860 18” x 60” Gap Lathe, with inch / metric threading, 3-jaw chuck, digital readout,l S/N: 18699010260 (1999)
• Hardinge HLV-EM Super Precision Secondary Operation Dovetail Bed Lathe, with 3,000-RPM spindle speed, 5C collet attachment, taper attachment, inch / metric threading, S/N: HLV-8839-7 (1980)

VERTICAL MILLS

• [3] Sharp 3HP Ram Type Variable Speed CNC Vertical Milling Machines, with Trak A.G.E.-3 controller, travels: x-31.5”, y-15”, z-14”, R-8 spindle taper, 60-4200 RPM spindle speeds, 3HP spindle drive motor, 10” x 50” table, power draw bar, S/N’s: 70201027 (1998); 70201033 (1998); 60300898 (1997)
• Acer Ultima 3HP Ram Type Variable Speed Vertical Milling Machine, with 9” x 48” power feed table, Newall Sapphire 2-axis digital readout, S/N: 97121330 (1997)
• Bridgeport 2J Vertical Milling Machine, with 9” x 42” table, 60-4200 RPM spindle speeds, S/N: 147952

CNC ROUTERS

• [2] Vision 2550 CNC Bridge Type Routers / Engravers, with teach pad control, Dell Precision 390 microprocessor, S/N’s: N/A (2013)

SAWS

• Hyd-Mech V-18 Series II Semi-Automatic Hydraulic Vertical Bandsaw, with 45˚ tilting, 18” round capacity, 18” x 20” rectangular capacity @ 90˚S, 13” round capacity @ 45˚S, 5HP, S/N: J0500791 (2000)
• Hyd-Mech VW-18 Vertical Tilting Bandsaw, S/N: JWA0908261
• Acra KV-50 Vertical Bandsaw, with blade welding, S/N: V50829 (2000)
• Wilton 7040 Horizontal Bandsaw, S/N: 0411099
• Dayton YYG31 9” x 16” Horizontal Bandsaw, S/N: N/A

WELDING

• Rapol P-1000 1000# Rotary Welding Positioner, with 26” diameter table, 30” table height, 0-90˚ tilt, 0.1-5RPM rotation speed, 1/2HP tilt & rotation drive motors, dynamic braking, foot pedal control, S/N: 33111 (2013)
• Pandjiris 30-6 3000# Capacity Welding Positioner, S/N: 400-8096
• Miller XMT350 CC/CV Arc Welder, with Miller 70 Series wire feed, Coolmate 3, S/N: N/A
• Lincoln Precision Tig 375 375-Amp Tig Welder, S/N: U1060500281 (New 2006)
• Miller Syncrowave 351 Digital Welder, S/N: KH358021 (1997)
• ESAB Migmaster 250 Tig Welder, S/N: MBHJ705029
• Miller Dynasty 200 Digital Welder, S/N: MB480074L

VIBRATORY FINISHING MILLS

• Rosler R1300S Type D1-2/100 Vibratory Finishing Mill, S/N: 9000012518 (New 2018)
• VFM UA100-A Vibratory Finishing Mill, with metering, Graymills sludge removal, S/N: 13005
• Sweco 48” Vibratory Parts Finisher, with Graymills coolant system, automated finishing system
• Sweco FMD-10-7 Vibratory Finishing Mill, S/N: 10FM-168-34
• Giant Vibratory Finishing Machine, 2-pan, 3’ & 2’ long, with timer

LIFTS/FLOOR SCRUBBER

• Raymond EASI 2500# Capacity Stand-Up Electric Forklift Truck, S/N: ET-B-95-02071 (1995)
• JLG 2032-E2 Electric Scissor Platform Lift, S/N: N/A
• Tennant T16 Electric Rider Type Floor Scrubber, S/N: T16-24240 (2013)

PALLET RACKING

• Approximately [150] Sections 4-Tier Pallet Racking

CRANE SYSTEMS

• Gorbel 2000# x 30’ Span x 70’ Long Free Standing Bridge Crane, with [3] 2000# x 30’ span single girder underhung bridges, electric chain hoists, pendant controls, all related crane rail & i-beam supports

MISCELLANEOUS MACHINERY

• Assorted Parlec Parsetter Tool Setters, including Parset 320, 240, 2000, 260, TMM-900, 2500
• Fosdick 4’ x 12” Column Radial Drill, with 24” x 36” elevating table, S/N: 220061
• Clausing 2276 20” Drill Press, with 24” x 36” production table, S/N: 20532385
• Sunnen MBB-1800 Honing Machine, with miscellaneous tooling, S/N: 73120
• Keith EHSK-12-12-12-3100 1700˚C Electric Furnace, with 12” x 12” x 12” internal dimensions, S/N: 8015-0686
• Moore Jig Borer, with 11” x 24” table, 12” vertical head travel, 0-2500 RPM variable speed spindle, boring chucks, tool holders, drill chucks, S/N: B1202 (1967)
• Dake 6275 75 Ton Hydraulic H-Frame Press, S/N: 197287
• [2] Robovent DFP-800-1 Portable Fume Extractors, S/N’s: 23696; N/A
• Clark / Coral SH-2000A Universal No-Smoke 1600-CFM Portable Fume Collector, S/N: N/A

MISCELLANEOUS SHOP SUPPORT

THOUSANDS OF ITEMS, including: tremendous quantity of CNC tool holders, CAT 50 / 40 / BT40, tool scoots, assorted collets, end mills, reamers, drills, vises, wood top work benches, Kurt milling vises, vidmar cabinets, Anglok & Parlec vises, tool presetters, machine pallets up to 31” x 31”, large quantity of tombstones – up to 23” x 14”, large quantity of assorted fixtures, height gages, plug gages, free standing jibs, welders, welding positioners, boring heads, carts, ladders, stock ladders, pallet jacks, hydraulic pump units, magnetic lifting blocks, vacuum chuck, PLUS MUCH MORE!!!

INSPECTION

Including: ID & OD gages, v-blocks, pin gage sets, micrometers, granite surface plates, steel layout tables, gage blocks, digital height gages, height gages, bore gages, plug gages, intramikes, MUCH MORE!!!

Click Here to View HN Precision – Late Model CNC Machining Facility (DAY 2 – Online Only)