FEATURED ASSETS:

CNC VERTICAL TURNING CENTERS

• HNK MDL. VTC40/50, new 2012, Fanuc 18i-TB CNC control, 157.4″ tbl. dia., 196.8″ swing, 98.4″ turning ht., 12-pos. ATC, live spdl. and 0.001 C-axis tbl. indexing, thru spdl. coolant, tbl. spds. 2-steps: 1–50 RPM, 59″ Z-axis vert. ram travel, CAT-50 ta­per, milling spdl. spds.: 15–1,500 RPM, 118/154 HP tbl. motor, 30/35 HP milling spdl. motor, chip conveyor, S/N 11407, Asset No. CVTL-7.
• (2) HNK MDL. VTC30/40, new 2012, Fanuc 18i-TB CNC control, 118.1″ tbl. dia., 157.4″ swing, 86.6″ turning ht., 12-pos. ATC, live spdl. and 0.001 C-axis tbl. indexing, thru spdl. coolant, tbl. spds. 2-steps: 1–80 RPM, 51.2″ Z-axis vert. ram travel, CAT-50 taper, milling spdl. spds.: 15–1,500 RPM, 80/100 HP tbl. motor, 30/35 HP milling spdl. motor, chip conveyor, S/N 12323, Asset No. CVTL-8 and S/N 11319, Asset No. CVTL-9.
• HNK MDL. VTC25/30, new 2009, Fanuc 18i-TB CNC control, 98.4″ tbl. dia., 118.1″ swing, 78.7″ turning ht., 16-pos. ATC, live spdl. and 0.001 C-axis tbl. indexing, thru spdl. coolant, chip blaster, tbl. spds. 2-steps: 1–100 RPM, 39.3″ Z-axis vert. ram travel, CAT-50 taper, milling spdl. spds.: 15–1,500 RPM, 50/60 HP tbl. motor, 20/25 HP milling spdl. motor, chip conveyor, S/N 09257, Asset No. CVTL-4.
• HNK MDL. VTC20/25, new 2007, Fanuc 18i-TB CNC control, 78.7″ tbl. dia., 98.4″ swing, 70.8″ turning ht., 16-pos. ATC, live spdl. and 0.001 C-axis tbl. indexing, thru spdl. coolant, chip blaster, tbl. spds. 2-steps: 1–200 RPM, 39.3″ Z-axis vert. ram travel, CAT-50 taper, milling spdl. spds.: 15–1500 RPM, 50/60 HP tbl. motor, 20/25 HP milling spdl. motor, chip conveyor, S/N 07223, Asset No. CVTL-3.
• HNK MDL. VTC16/20, new 2012, Fanuc 31i–Model A CNC control, 63″ tbl. dia., 78.7″ swing, 118.1″ turning ht., 16-pos. ATC, live spdl. and 0.001 C-axis tbl. indexing, thru spdl. coolant, chip blaster, tbl. spds. 2-steps: 1–250 RPM, 49″ Z-axis vert. ram trav­el, CAT-50 taper, milling spdl. spds.: 15–1,500 RPM, 60/74 HP tbl. motor, 20/25 HP milling spdl. motor, chip conveyor, S/N 12614, Asset No. CVTL-6.
• (2) HNK MDL. NT-16/20, new 2007, Fanuc 18i-TB CNC control, 63″ tbl. dia., 78.7″ swing, 63″ turning ht., 12-pos. ATC, tbl. spds. 2-steps: 1–250 RPM, 35.4″ Z-axis vert. ram travel, 50/60 HP tbl. motor, chip conveyor, S/N 07134M, Asset No. CVTL-1, S/N 07129, Asset No. CVTL-2.
• DYNAMIC/KDM MDL. M-12/16/F, new 2009, Fanuc 18i-TB CNC control, 49.2″ tbl. dia., 65″ swing, 63″ turning dia., fixed rail, 40.1″ tbl. to toolholder, 36.2″ tbl. to milling spdl., 12-pos. ATC, live spdl. 0.001 C-axis tbl. indexing, thru spdl. coolant, tbl. spds. 2-steps: 1-350 RPM, 2,000 RPM max. milling spds., S/N KTM 120082, Asset No. CVTL-5.

CNC BRIDGE TYPE VERTICAL MACHINING CENTER

• SNK MDL. RB-4NM, Fanuc 18M CNC control, (2) 78.7″ x 157″ pallets, 114″ btwn. columns, 167″ X, 114″ Y, 23.6″ Z, 55″ W-axis travels, CAT-50, 6,000 RPM, 30 HP, (Note: this machine is currently inoperable).

VERTICAL MACHINING CENTERS

• (2) ENSHU MDL. 650VX, Fanuc Series 15-M CNC control, 78.7″ x 25.6″ tbl. size, 60″ X, 25.2″ Y, 26″ Z-axis travels, 6,000 RPM, 30-pos. ATC, CAT-50 taper, S/N 218, S/N 290.

CNC HORIZONTAL BORING MILLS

• (2) HNK MDL. HB-150X, new 2012, Fanuc 31i–Model A CNC control, 60-pos. ATC, 5.9″ spdl. dia.,157.4″ X, 98.4″ Y, 78.7″ Z, 27.6″ W-axis travels, 78.7″ x 86.6″ 0.001 deg. B-axis rotary tbl., chip conveyor, chip blaster, thru spdl. coolant, scale feedback, CAT-50 taper, spds.: 5–2,000 RPM, 50/60 HP, S/N N.A., Asset No. BM-14.
• (2) HNK MDL. HB-150, new 2011, Fanuc 31i–Model A CNC control, 40-pos. ATC, 5.9″ spdl. dia., 118.1″ X, 90.5″ Y, 63″ Z, 27.6″ W-axis travels, 78.7″ x 86.6″ 0.001 deg. B-axis rotary tbl., chip conveyor, chip blaster, thru spdl. coolant, scale feedback, CAT-50 taper, spds.: 5–2,000 RPM, 50/60 HP, S/N 11651 Asset No. BM-16 w/Fanuc 31i – Model A CNC control; S/N 11619 Asset No. BM-12 w/Fanuc 18i-TB CNC control and set up to accommodate C-axis rotary tbl.
• HNK MDL. HB-130CX, new 2008, Fanuc 18i-MB CNC control, 60-pos. ATC, 5.1″ spdl. dia., 157.4″ X, 90.5″ Y, 51.2″ Z, 27.6″ W-axis travels, 63″ x 157.4″ T-slotted tbl., 63″ x 63″ 0.001 deg. built-in B-axis rotary tbl., chip conveyor, chip blaster, thru spdl. cool­ant, scale feedback, CAT-50 taper, spds.: 5–2,500 RPM, 30/35 HP, set up to accom­modate C-axis rotary tbl. S/N 07462, Asset No. BM-3 (Out of service).
• (4) HNK MDL. HB-130, new as 2011, Fanuc 31i–Model A CNC control, 40-pos. ATC, 5.1″ spdl. dia., 118.1″ X, 90.5″ Y, 51.2″ Z, 27.6″ W-axis travel, 63″ x 70.9″ 0.001 deg. B-axis rotary tbl., chip conveyor, chip blaster, thru spdl. coolant, scale feedback, CAT-50 taper, spds.: 5–2,500 RPM, 30/35 HP, [S/N 11577 (2011) Asset No. BM-17 and S/N 11584 (2011) Asset No. BM-8, both have Fanuc 31i–Model A CNC controls;] [S/N 11151 (2011) Asset No. BM-18 has Fanuc 18i-TB CNC control;] [S/N 08468 (2008) Asset No. BM-6 has Fanuc 18i-TB and is out of service.]
• GIDDINGS & LEWIS, retrofitted 2013, Siemens Sinumerik control, 60″ x 120″ tbl., 6″ spdl., (4) outriggers, S/N N.A., Asset No. BM5 (Out of service).
• GIDDINGS & LEWIS MDL. RB1600, retrofitted 2013, Siemens Sinumerik control, 63″ x 98″ tbl., 6″ spdl., Asset No. BM4, S/N 480-0046 (Out of service).
• GIDDINGS & LEWIS MDL. TX60, retrofitted 2013, Siemens Sinumerik control, 48″ x 72″ tbl., 6″ spdl., 90-pos. ATC, S/N 50-1694-80, Asset No. BM10 (Out of service).
• GIDDINGS & LEWIS MDL. TX60, retrofitted 2013, Siemens Sinumerik control, 48″ x 72″ tbl., 6″ spdl., Asset No. BM9 (Out of service).

CNC FLOOR TYPE HORIZONTAL BORING MILLS

• HNK MDL HFB-180, new 2011, Fanuc 18i control, approx. travels, X 49′, Y 17′, Z 47.24″, W-47.24″, 7.08″ spindle dia., 16′ x 12′ infeeding tbl., right angle head, floor plates. (NOTE: this machine incurred a major headstock crash and is currently inop­erable).
• COLLET & ENGELHARDT, Heidenhain CNC control, approx. travels: X 30′, Y 20′, Z-96″, 33′ x 19′ floor plate.

HEAVY DUTY 4TH AXIS ROTARY TABLES

• TSUDAKOMA MDL. RNCV-1501L, 58-3/4″ faceplate, 18,700-lb. horiz. and 37,400-lb. vert. allowable work weight cap., S/N 116886; TSUDAKOMA MDL. RNCV-1201L, 49″ faceplate, S/N 087364; TSUDAKOMA MDL. RNCV-1001K, 39-1/4″ faceplate, S/N 086119; TSUDAKOMA MDL. RNCV-801K, 32″ faceplate, S/N 086806.
• MODULAR, FACING & CONTOURING HEADS
• COGSDILL MDL. MBT75 CONTOURING STYLE, single slide, Tool No. MBT75-ST-CAT50-0, S/N 52916; COGSDILL MDL. ZX200-TC FACING AND GENERATING STYLE, S/N 24240; COGSDILL MDL. ZX420-TC PROFILING AND CONTOURING STYLE; COGSDILL MDL. ZX420-TC-CAT-50-0 PROFILING AND CONTOURING STYLE.
• HNK 6″ REPLACEMENT SPINDLE (new in box).

HORIZONTAL BANDSAW

• AMADA 78″ X 78″ MDL. H-2000, 3″ blade width, 57’6″ blade length, .063 blade thickness, Asset No. SAW-3.

RADIAL ARM DRILL

• CARLTON 10′ X 26″, (2) tbls., pwr. clamping, pwr. elevation and pwr. feed, double end base, spds.: 10–1,000 RPM, S/N 5A5740.

VERTICAL BORING MILLS

• 144″ KING MDL. 144, (2) ram heads, S/N N.A.; 96″ KING MDL. 100, (2) ram heads, floor mount, S/N 3210; 84″ KING MDL. 84, (2) ram heads, (1) side head, floor mount, S/N N.A.; 72″ KING MDL. 72, (2) ram heads, floor mount, S/N 1614; 52″ KING MDL. 52, ram, turret, side head, floor mount, S/N 3118.

PLANER MILLS

• GRAY, 64″ x 368″ tbl., (2) 50 HP vert. and (2) 50 HP horiz. milling heads, pendant controls.
• INGERSOLL, 84″ x 216″ tbl., (2) vert. and (2) horiz. milling heads, D.R.O., pendant controls.
• INGERSOLL, 60″ x 216″ tbl., (2) horiz. milling heads, (1) vert. milling head.

PRODUCTION MILLS

• CINCINNATI HYPOWERMATIC, 24″ x 120″ tbl. size, duplex production mills, S/N 311452D5V-3; CINCINNATI HYPOWERMATIC MDL. 550-2612, 36″ x 120″ tbl. size, duplex, ram type, S/N 3114.SPE 79-0005.

TOOLING & CONSUMABLES

• CAT. 50 TAP DRIVERS; SHELL MILL HOLDERS; ENDMILL HOLDERS; INSERTED THREAD MILLS; BORING HEADS; TAPPING HEADS; 1-1/2″ H.D. TURNING TOOLS; 10″L. SPADE DRILLS; INDEXABLE INSERTED DRILLS; BORING BARS; FACEMI­LLS; RADIUS CUTTERS; RETENTION KNOBS; REAMERS; CHUCKS; BORING MILL JAW SETS; RIGHT ANGLE HEADS; SET-UP TOOLING; TOOLMEX CORP. MDL. 3295-26, 26″ dia. 3-jaw self-centering scroll chuck, plain back, 16″ spdl. bore (new in box); HUGE QUANTITY!

QUALITY CONTROL EQUIPMENT

• GRANITE SURFACE PLATES, (2) 48″ x 96″ x 10″ thk., 36″ x 48″ x 6″ thk., grade AA; ASSORTED LARGE CAPACITY O.D. MICROMETERS up to 102″; DIGITAL CALI­PERS AND VERNIER CALIPERS up to 80″; BORE GAUGES; MITUTOYO 16″–24″ DIAL BORE GAUGE; DEPTH GAUGES; GROOVE WIDTH GAUGES; PLUG GAUGES; RING GAUGES.

BORE CLADDER SYSTEM

• ARC SPECIALTIES MDL. ARC-6G, new 2013, servo controlled rotary torch head, 96″ vertical (mast) travel (counterbalanced), 60″ horizontal (boom) travel, 144″ lin­ear travel (carriage) Hot 1 hot wire pwr. supply, Miller XMT450 CC/CV, S/N MD190071U, 48″ x 57″ box tbl., linear guides, S/N 1413-20810.
• SUB ARC PIPE CLADDING SYSTEMS
• CONSISTING OF: 20′ track, platform, Miller Mdl. XMT450 CC/CV and Miller wire feeder, for welding I.D. of pipe. approx. (6) available.

WELDING MANIPULATORS

• ARONSON MDL. 3SFB24VRA18CL-CK SUB ARC, 1,000-lb. cap. at each end, fixed boom, 288″ reach travel, 216″ lift travel, approx. 20′ cap. traveling weld carriage, Lincoln Idealarc Mdl. DC1000, new 2012, S/N U1120604605, Lincoln NA-3S control, S/N 741.
• JETLINE ENGINEERING 5′ X 5′ MDL. CWF-10A MIG, Jetline control, Jetline Mdl. 9029 wire feed control, S/N 920212.

WELDING POSITIONERS

• ARONSON MDL. GE500CS, 50,000-lb. cap. @ 12″, 600,000-lb. in rotation, 1,050,000-lb. in tilt, 84″ sq. rotary tbl. geared elevation, S/N 7846.
• PANDJIRIS 4,500-LB. CAP. MDL. 45-12ABPOSIT, 48″ sq. tbl., S/N 18924E00.

HEADSTOCK/TAILSTOCK STYLE POSITIONERS

• PANDJIRIS SET, incl.: Mdl. HS-200 headstock, pendant control w/variable spd., 72″ center ht. w/16″ spacer, 39-1/4″ dia. 4-jaw chuck, 64″ dia. faceplate, 13-1/2″ bore, S/N 18342E00-2, Mdl. TS-200 tailstock, 24-3/4″ dia. 3-jaw chuck mtd., 64″ dia. face­plate, 9-3/4″ bore, S/N 18342E00-1.
• PANDJIRIS SET, incl.: Mdl. HS-200 headstock, pendant control w/variable spd., 72″ center ht. w/16″ spacer, 24-3/4″ dia. 3-jaw chuck, 62″ dia. faceplate, 9-3/4″ spdl. bore, S/N 18342E00-1, Mdl. TS-200 tailstock, 24-1/2″ dia. 3-jaw chuck, 64″ dia. face­plate, 9-3/4″ bore, S/N 18342E00-2.

UPENDER

• APPROX. 15,000-LB. CAP., 50″ x 54″ tbl., chain driven.

WELDING MACHINES

• (3) MILLER MDL. XMT450 CC/CV, S/N MD340037U, S/N MD370527U, S/N MD190108U.
• (4) ESAB MDL. MTS-3500I.
• PORTABLE WELDING BOOMS
• MILLER DETLAWELD MDL. 650 MIG PWR. SOURCE, S/N JF892216, Miller wire feeder, welding boom; MILLER DELTAWELD MDL. 651 MIG PWR. SOURCE, weld­ing book, S/N KA826386; MILLER WIRE FEEDER, S/N N.A.

ROTARY WELDING TABLES

• PRESTON EASTON 59″ MDL. FT400HD, new 1997, 4,000-lb. cap., S/N FT400HD-17.
• PRESTON EASTON 54″ MDL. FT400HD, new 1995, 4,000-lb. cap., S/N FT400HD-13.

ROD OVEN

• KEEN MDL. KHT-450.

CAR BOTTOM FURNACE

• ERCO, dims: 8’W. x 9’L. x approx. 7’H., gas fired, Omega RD9900 Series display, updated controls, 900–1,400 deg. temp. rating.

ELECTRIC FURNACES

• HOTFOIL-EHS, dims: 60 x 48 x approx. 12’L., Red Lion controls.
• TRENT, dims: approx. 10’L. x 6’W. x 6’H., 75 kW, 850 deg. F. max. temp, No. 899-550.

ROTARY SCREW AIR COMPRESSORS

• QUINCY MDL. QGD-50, 50 HP motor, S/N N.A.
• SULLAIR MDL. 3709/A, 50 HP, new 2007, S/N 200708250042.

AIR DRYER

• QUINCY MDL. QPNC250, new 2017.
• MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENT
• APPROX. (25) HIPPO HOPPER 1 CU. YD. DUMP HOPPERS; SHOP FANS; TRASH CANS; BANDING CARTS; TBLS.; CHAIRS; FLAMMABLE MATERIAL STORAGE CABINETS; SHOP TOOLS; DOLLIES; TOOLBOXES; CLEANING EQUIPMENT; ROLL­ER DRAWER CABINETS.

SEA CONTAINERS

• 40’L. w/contents; (3) 20′ w/contents.

OVERHEAD BRIDGE CRANES

• PROSERV 60 T. X 100′ SPAN, 34′ under hook, double girder, top running, R&M hoist, radio controlled.
• PROSERV 30 T. X 100′ SPAN, 31′ under hook, double girder, top running, R&M hoist, radio controlled.
• 15 T. CAP. X 69′ SPAN, 30′ under hook, double girder, top running.
• PROSERV 10 T. X 38′ SPAN, 35′ under hook, single girder, top running.

FORKLIFTS

• ROYAL 30,000-LB. BASE CAP. MDL. T300, LPG, 115″ 2-stage mast, 93″ lift ht., cushion tires, fork positioner, side shift, 8′ forks, S/N L0741.
• TAYLOR 18,800-LB. BASE CAP. MDL. Y-22-WOM, diesel pwrd., 2-stage mast, S/N S-26-13061 (Out of service).
• (2) HYSTER 15,500-LB. BASE CAP. MDL. S155FT, new 2014, diesel, 113″ 2-stage mast, 172″ lift ht., cushion tires, forks, S/N F024V02276M, 5,691 HOM; S/N G024V01503M, 7,778 HOM.
• YALE 12,000-LB. BASE CAP. MDL. GLC120, new 2014, LPG, 70″ 2-stage, mast, 86″ lift ht., cushion tires, forks, 4,020 HOM, S/N F81802626M.
• (2) CATERPILLAR 11,000-LB. BASE CAP. MDL. DP50K-D, diesel pwrd., 3-stage mast, 172″ lift ht., S/N AT28B60410 (Out of service), S/N N.A.
• (2) HYSTER 10,000-LB. BASE CAP. MDL. S100FT, new 2014, LPG, 88″ 2-stage mast, 133″ lift ht., cushion tires, side shift, forks, S/N H004V2774M, 6,734 HOM; S/N H004V2776M, 8,760 HOM.
• (2) TOYOTA 8,000-LB. BASE CAP. MDL. 8FGCU35U-BCS, new 2018, LPG, 105″ 3-stage mast, 238″ lift ht., side shift, cushion tires, 42″ forks, S/N 13334, S/N 13336.
• (2) CATERPILLAR 8,000-LB. BASE CAP. MDL. GC40K, new 2015, LPG, 93″ 3-stage mast, 201″ lift ht., side shift, cushion tires, 48″ forks, S/N AT87B00723, AT87B00753.
• TOYOTA 6,500-LB. BASE. CAP. MDL. 8FGCU32, new 2016, LPG, 87″ 3-stage mast, 187″ lift ht., rotating forks, cushion tires, 42″ forks, S/N 66307.

MATERIAL HANDLING EQUIPMENT

• SLINGS; CHAIN; SHACKLES; (2) 10,000-LB. ERIEZ SAFE HOLD LIFTING MAG­NETS.

ELECTRIC SCISSOR LIFT

• ALL AERIALS 700-LB. CAP. MDL. MEC3247ES, new 2009, 32′ max. drive ht., 32′ max. platform ht., extended platform, S/N 1001827.

PEDESTAL JIB CRANE

• ABELL-HOWE 2 T. CAP., CM electric chain hoist.